CASE DV210 Asphalt Roller | Compaction Equipment 
  • SV208

  • SV210

  • SV212

  • SV216

  • DV23

  • DV26

  • DV36

  • DV45

  • DV207

  • DV210

  • DV209C

  • DV210C

  • DV213

  • PT240



360 View


Engine Power
99 hp | 74 kW

Operating Weight
22,928 lb | 10400 kg

Model Configurator:

With automatic vibration control to ensure a smooth and consistent surface, the CASE DV210 asphalt roller establishes a new industry standard for performance, productivity and reliability. The cab is designed for maximum operator comfort, allowing you to stay focused on the job at hand. In addition to ground level checkpoints, the DV210 compactor also has a vertical-lift hood for trouble-free access to the engine compartment.


  • DV210 Specifications

    Size: 475 KB

  • DV Series Brochure

    Size: 4533 KB

  • Full Line Brochure

    Size: 1161 KB

  • 1024 x 768 Desktop Wallpaper

    Size: 265 KB

  • 1400 x 1050 Desktop Wallpaper

    Size: 456 KB

CASE DV210 Compactor

Productivity is maximized on coarse bases and hot-mix asphalt surfaces with high centrifugal forces and dual amplitudes. 100 percent traction efficiency and zero slippage on compacted surfaces are delivered by our CASE Dual Drum Drive.  Surface damage is minimized while delivering smooth pavement due to automatic vibration control.

Meet current environmental standards and consume less fuel with Tier III-certified engines.

Keep comfortable even on rough surfaces with the vibration-dampening, isolation-mount work platform. Operators get a full view of the compacted surface through a multi-position station and 180 degrees of swivel seat positioning. Illumination is improved via standard front and rear-facing halogen lights.

Daily maintenance and diagnostics can be done quickly and easily through a one piece vertical lift hood and ground-level access to various service checkpoints.

Engine make / model Cummins QSB 3.3 C99 
Rated HP @ RPM 99 hp (74 kW) 
Transmission type Hydrostatic 
Max travel speed, fwd 7.4 mph (12 km/h) 
Theoretical gradability 40% 
No of vibrating drums
Nominal amplitude or range .0138 " (.35 mm) / .0276 " (.70 mm) 
Vibration frequency range 2,700 vpm (45 Hz) / 3,180 vpm (53 Hz) 
Centrifugal force range 17,256 lb (77 kN) / 24,651 lb (110 kN) 
Overall length 15 ' 7 " (4760 mm) 
Overall width 71 " (1822 mm) 
Overall height 9 ' 8 " (3000 mm) 
Ground clearance 11.4 " (290 mm) 
Steering angle, L / R 36° 
Oscillation angle, L / R 6° 
Inside turning radius 183 " (4650 mm) 
Drum width 66 " (1.7 m) 
Drum diameter 51 " (1.3 m) 
Drum thickness .87 " (22 mm) 
Operating weight 22,928 lb (10 400 kg) 
Drum weight 11,718 lbs (5315 kg) 
Fuel tank 55 gal (208 l) 
Water tank Pressurized 
Hydraulic reservoir 14.8 gal (56 l) 
Fixed ROPS Open Platform with hand rails
Anti-vandal cover
Halogen worklights x 4 (55 watt / front and rear)
Turn signal indicator (left and right)
Hydrostatic drive for both drums
Dual vibration
Front/dual/rear drum vibration control
Auto vibration stop switch in neutral
Articulated chassis
Hydraulic oil cooler
Backup alarm
Retractable seat belt - 2 in (51 mm)
Lateral shifting suspension seat with foldable arms
Pressurized water system
Machined tapered edge drums
Water filtration - 3 stage
Master disconnect switch
Emergency stop button
Lift and tie down provision - 4-point
Watering system drains
Electric fuse protection
Steering wheel spinner knob
Spin-on fuel, engine oil and hydraulic filters
Tool box
Vertical lift hood
Indicator lights
  Engine oil pressure
  Intake preheater
  Engine temperature
  Parking brake
  Vibration ON/OFF
  Sprinkler system ON/OFF
Rotating beacon
Front and rear work lights
(ROPS or cab mounted)
Cab with heat and air conditioning
Edge Cutter
Tiltable scrapers
Seat type Suspension
Emission Rating Tier 3
Engine manufacturer Cummins
Engine model QSB 3.3 C99
Engine rated power - hp (kW) 99 (74)
RPM - power rating - rpm 2200
Displacement - Inches³ (ltr) 201.3 (3.3)
Transmission type Hydrostatic
Drum drive single/double Both
Gradeability with vibration - % 47
Drum vibration Both
Centrifugal force 1 - front - lbf (kN) 17256 (77)
Centrifugal force 1 - rear - lbf (kN) 17256 (77)
Fuel tank - gallons (US) (ltr) 55 (208)
Water tank - gallons (US) (ltr) 264 (1000)
Overall length - inches (mm) 187 (4760)
Overall width - inches (mm) 71 (1822)
Height w/ROPS - inches (mm) 116 (3000)
Inside turning radius - inches (mm) 183 (4650)
Outside turning radius - inches (mm) 249 (6324)
Drum width - inches (mm) 66 (1700)
Operating weight - lbs (kg) 22928 (10400)

Base & Extended Warranty Coverage*
1 Year / Unlimited Hour Full Coverage Base Warranty
Engine warranted by manufacturer

Purchased Protection
Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost.  Your Case dealer can help you determine the plan that fits your needs.  Plans are available up to six-years / 7,500 hours on Case Compaction Equipment.

*Please see your Case dealer for limitations, exclusions, and confirmation of policies in effect.  The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity.  Genuine Case service parts or Case approved service parts that meet Case specifications must be used for maintenance and repairs.

Finding the Right Roller

There are a number of variables that determine the right roller for each compaction job. Here are a few things to consider when renting or buying a machine for compaction.

Size: 570 kbDownloaddl

Fuel System Maintenance

In this article we will examine a number of factors for optimal fuel system health, as well as a few critical maintenance practices to ensure safety and performance.

Size: 178 kbDownloaddl