CASE 2050M Crawler Dozer | Equipment | CASE Construction
CASE 2050M Crawler Dozer | Equipment  
  • 650L

  • 750M

  • 850M

  • 1150M

  • 1650M

  • 2050M



360 View


Engine Power
214 hp | 160 kW

Blade Width
135 in (3422 mm)

Model Configurator:

The largest in the CASE lineup, the new 2050M dozer was designed with mass and muscle in mind. It offers up to 14% more power than the 1850K, nearly 81,000 lbs. of drawbar pull and a robust, box-style C-frame engineered to withstand extreme blade forces. But this 24-ton mammoth is also about less; less time spent on maintenance, less fuel usage thanks to industry-exclusive SCR technology and less worry thanks to the premium protection of ProCare. Simply put, from fine grading to heavy dozing, the 2050M gets more done.



    Size: 567 KB

  • 2050M Brochure

    Size: 5588 KB

  • M Series Brochure

    Size: 13672 KB

  • Full Line Brochure

    Size: 2833 KB

CASE 2050M Dozer

The 2050M puts powerful precision at your disposal thanks to best-in-class horsepower of 214 hp., massive drawbar pull of nearly 81,000 lbs., fingertip controls and customizable steering, shuttle and blade sensitivity settings that can be adjusted between Smooth, Moderate and Aggressive to match ground conditions and operator comfort. A new v-shaped cooling system with auto-reversing fan also helps maximize uptime by automatically clearing the cooling package of debris.

The M Series are the industry’s first dozers to be powered by a SCR (Selective Catalytic Reduction) Tier 4 engine. Rather than compromise power, this after-treatment system lets the engine do what it does best – run at peak performance. It also allows a lower hood profile for greater visibility than CEGR setups. SCR is simple too. No regeneration. No downtime. Just pour and go. 

The redesigned cab offers floor-to-ceiling glass doors and a cab-forward design to provide maximum visibility with direct line-of-sight to the blade edge and cab-to-ground vision of only 15.5-feet. True positive pressure helps keep out the elements and advanced sealing results in one of the quietest cabs in the industry with a decibel rating of 76 dBa. Upgraded environmental controls and a factory-installed radio are also available. An electro-hydraulic joystick with push-button controls for blade shake and fine grading also help simplify operation.

The M Series is built to minimize maintenance time. Heavy-duty swing-out panels with pressure-closing latches are housed on a solid, box-style frame that’s designed to give quick access to key service points so daily maintenance can be done in a matter of minutes.

The M Series comes standard with the industry’s first all-in-one heavy machine support program that’s as powerful as the equipment it protects – CASE ProCare.

Engine brand / model  
Gross power @ RPM  
Net power @ RPM  
Gross peak torque @ RPM  
Cylinders / displacement  
Alternator output  
Battery rating  
Transmission type / speeds fwd x rev  
Max speed, fwd / rev  
Drawbar pull at stall  
Final drive reduction  
Steering brakes  
Parking brake type  
Track type / description  
Track shoes per side  
No of upper rollers / bottom rollers  
Link pitch  
Undercarriage frame  
Track on ground  
Track gauge  
Total flow  
Main relief pressure  
Blade type  
Blade capacity  
Blade width  
Blade height  
Blade depth below ground  
Blade lift above ground  
Blade angle, L / R each direction  
Blade tilt  
Overall length  
Width, w / blade at max angle  
Height to top of cab  
Ground clearance  
Fuel tank  
Hydraulic reservoir  
Operating weight  

Fully enclosed ROPS cab
Single lever control for speed, steering and direction
Cloth air suspension seat w/ back adjustment
Retractable 2 in (51 mm) seat belt
Adjustable armrest
Two foot rest
Rearview mirror
Two door windshield wipers
Dome light
12-volt accessory outlet
Floor mat
Warning lights:
Air filter
Diagnostic fault indicator
Engine coolant temperature
Engine oil pressure
Hydraulic filter
Low fuel level
Park brake engaged
Service soon indicator
Transmission filter
Transmission charge pressure
Battery voltage
Fuel level
Digital hour meter/tachometer/diagnostic/service reminder
Transmission oil temperature
Transmission speed indicator
Water temperature
Diesel Exhaust Fluid (DEF) level
Audible warnings:
Engine coolant temperature
Engine oil pressure
Low fuel level
Transmission charge pressure
Temperature/hydraulic temperature

Tier 4 Interim Certified
Automatic fan belt tensioner
Integral engine oil cooling
Fuel filter
Dual element radial seal air cleaner
120 amp alternator
(2) 950 CCA 12-volt batteries
Anti-sandblast radiator
Engine side panels

Dual path infinitely variable, single-lever controlled hydrostatic drive, with electronic straight tracking and counter-rotation
Final drive: Triple reduction; helical gear/planetary decelerator with hydrostatic drive retardation
Automatic spring-applied parking brake

50° – 60° variable pitch, with integral adjustment tool
Single lever electro-hydraulic control for blade lift, angle and tilt

Hydraulic track adjusters
Case Lubricated Track Chain
Permanently lubricated track and carrier rollers and idlers
Track adjuster guard
Track guides – front and rear

Anti-vandalism package
Backup alarm
Work lights:
  2 front
  1 rear
Master disconnect switch
Front pull hook
Rear transmission guard

CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription

Cab air quality system
Seat belt – 3 in (76 mm)
Rear wiper for cab

4-spool hydraulic valve for field-installed ripper
3-spool hydraulic valve without plugs for
field-installed ripper
3-spool hydraulic valve with plugs

Ripper – 3 position with 3 shanks
Rear tow hook
Drawbar with step

PAT – 142 in (3607 mm)
PAT – 160 in (4064 mm)
Folding PAT – 160 in (4064 mm)
HS Straight (WT/LGP) – 154 in (3900 mm)
Semi-U – 135 in (3422 mm)

CAB canopy brush guard
Full length rock guards

Cab rear screen

Environmental drains
Case Extended Life Track
Cold start – grid heater
Additional work lights
Blade guidance ready - Trimble
Blade guidance ready - Leica
Blade guidance ready - Topcon
Rearview implement mirror
Turbine pre-cleaner

Emission Rating Interim Tier 4
Engine make / model FPT F4HFE613J
Net Power - hp (kW) 214 (160)
Gross Power - hp (kW) 232 (173)
Rated RPM - rpm 2000
Torque Output - lbf / ft (Nm) not published
Displacement - Inches³ (ltr) 409 (6.7)
Transmission Type Hydrostatic
Max Speed Fwd - mph (kph) 5.8 (9.3)
Max Speed Rev - mph (kph) 5.8 (9.3)
Drawbar Pull at Stall - lbf (kN) 80979 (360)
Differential Steering No
Steering Clutch/Brakes No
Shoe Width - inches (mm) 36 (914)
No. of Shoes 45
No. of Upper Rollers 2
No. of Bottom Rollers 8
Track on Ground - ft/in (mm) 10 ft 9 in (3280)
Main Pump Type Variable Displacement Piston
Pump Flow - gallons (US) / min (lt/min) 40.4 (153)
Blade Type PAT
Blade Capacity - yd³ (m³) 7.24 (5.54)
Blade Width - ft/in (mm) 13 ft 4 in (4064)
Length w/Dozer - ft/in (mm) 19 ft 4 in (5902)
Height to Top of Cab - ft/in (mm) 10 ft 2 in (3103)
Fuel Tank - gallons (US) (ltr) 107 (405)
Operating Weight - lbs (kg) 48773 (22123)
Base & Extended Warranty Coverage*
CASE ProCare applicable on select 2014 new heavy machine orders.

See your CASE dealer for model availability and timing.

Tier 4 Engine Solutions

In this article we’ll look at five key product categories (wheel loaders, excavators, dozers, backhoes and skid steers) and how Tier 4 solutions match up with their applications.

Size: 573 kbDownloaddl

Prevent Undercarriage Wear

In this article we will cover tips on how to prevent and minimize undercarriage wear, maximize undercarriage life and lower owning and operating costs.

Size: 517 kbDownloaddl

Fuel System Maintenance

In this article we will examine a number of factors for optimal fuel system health, as well as a few critical maintenance practices to ensure safety and performance.

Size: 178 kbDownloaddl