CASE 580 Super N WT Backhoe Loader | Equipment 
  • 580N

  • 580 Super N

  • 580 Super N WT

  • 590 Super N

580 Super N WT 

Close

360 View

580 Super N WT

Engine Power
95 hp | 71 kW

Dig Depth
14 ' 4.9 " (4.39 m)

Model Configurator:

If you’re looking for superior performance, the CASE 580 Super N Wide Track backhoe is the model to choose. This unit features a wider cab design for ultimate operator comfort and exceptional performance to match. The lower ground pressures allow the 580 Super N WT to travel across a broad range of terrains. The all new, Tier 4 CASE engine combined with CEGR technology burns cleaner than previous models while meeting certified emissions levels.

Download

  • 580 Super N WT Specifications

    Size: 276 KB

  • N Series Brochure

    Size: 4255 KB

  • Full Line Brochure

    Size: 1161 KB

  • 1024 x 768 Desktop Wallpaper

    Size: 436 KB

  • 1400 x 1050 Desktop Wallpaper

    Size: 297 KB

CASE 580 Super N WT Backhoe


PRODUCTIVITY
The 580 Super N Wide Track offers superior performance on both the backhoe and loader side of the machine.  With excellent breakout forces and outstanding reach, this model is a great addition to any fleet.  The standard PowerLift feature on the 580 Super N Wide Track increases operator productivity by breaking through some of the toughest soils.  It also boasts the highest lift capacities in the industry.  To help reduce material spillage during roading, equip the machine with the Ride Control or Auto-Ride Control (4WD ONLY) options.  Operators can also customize their forward/reverse transitions on the Powershift S-Type and Powershift H-Type transmissions with the industry-exclusive SmartClutch modulation.  The side mounted, high intensity flex lights allow operators superior jobsite visibility for when late night operation is necessary.  The large tires with the limited slip differential improve operation in rough terrains.

FUEL EFFICIENCY
The 580 Super N Wide Track features our new, Interim Tier 4 engine with CEGR technology and diesel particulate filter.  This engine boasts a minimum 5% better fuel efficiency than our previous models and faster response times while meeting current environmental standards.  The hydraulic system is also designed to offer optimum fuel efficiencies with maximum power.

COMFORT/VISIBILITY
Operators will be able to easily communicate to their spotter and enjoy superior cross-ventilation with rear-quarter windows that open.   Floor to ceiling glass provides excellent visibility to trenches and spoil piles.  Making sure every operator is comfortable, Case offers their traditional foot swing control, two-lever controls, or pilot controls for operating the backhoe.  The Case pilot controls are the most ergonomic in the industry featuring unlimited adjustments fore/aft, tilt in/out, and full surface adjustable wrist rests.  The fully integrated loader control lever puts operation at the operator's fingertips for faster response times.  All of this matched with a wide cab creates a fatigue free operating environment.

SERVICEABILITY
Maximize uptime with simple and efficient daily maintenance. Swing-out coolers and ground level hydraulic test ports are easily accessible while a flip-up hood, spin-on filters, grouped service points and serviceable axles without complete disassembly make routine upkeep easy.

Make / model Case 434T/E Tier 4 Interim Certified 
Gross power @ RPM 97 hp (72 kW) @ 2200 rpm 
Net power @ RPM 95 hp (71 kW) @ 2200 rpm 
Transmission type Powershift S-Type, 4F-3R fully synchronized 
Max travel speed, fwd 24.1 mph (38.8 km/h) 
Backhoe flow 41 GPM @ 3100 PSI (156.2 lpm @ 161 bar) 
Lift capacity at full height 8,425 lb (3822 kg) 
Max loader bucket heaped capacity 1.29 cu yd (.99 cu m) 
Loader bucket breakout force 10,873 lbf | 4837 daN 
Dig depth- 2 ft (610 mm) bottom 14 ' 4.9 " (4.39 m) 
Bucket digging force 14,831 lb-ft (65 972 N) 
Dipper stick digging force 9,458 lb-ft (42 071 N) 
Boom lift at 12 ft (3 660 mm) 3,913 lb (1775 kg) 
Transport height 11 ' 0.5 " (3.37 m) 
Transport length 23 ' 3.8 " (7.11 m) 
Operating weight, 4WD 19,985 lb (9065 kg) 

OPERATOR’S COMPARTMENT
ROPS/FOPS certified protective canopy
Key start
Hydrostatic steering
Vinyl air suspension seat w/180° swivel
Seat turn around
Electronic hand and foot throttles
Ergonomic loader control lever w/push-button activation of differential lock and transmission de-clutch
Backhoe pilot controls
(2) Accessory power plugs (30 amp)
Anti-vandalism covers (canopy only)
Cup holder
Coat hook w/tether strap (cab only)
Interior rearview mirror
3 in (76 mm) retractable seat belt
Storage compartment w/lid
Left side storage tray
+900 lb (408 kg) counterweight
Extendahoe®
4WD

ENGINE
Case F5C Interim Tier 4 with CEGR/DPF aftertreatment
IT4 or Tier 4 A Emissions compliant
Glow plugs cold start
Full flow engine oil filter
Air cleaner - replaceable dry type with radial seal
Aspirated air cleaner
Fuel filter w/water trap
Diesel Particulate Filter F - spark arresting
Fuel tank - useable capacity 42 gal (159 L)
Radiator with overflow bottle
Antifreeze to -34°F (-37°C)
Electronic throttles (foot and rotary hand)
High Pressure Common Rail computer controlled injection with diagnostic features

LOADER
Single-lever control for lift and tilt
Positive hold float
Return-to-dig
Automatic self-leveling
In-line, reverse linkage
Dual parallel dump cylinders
Clutch disconnect button on loader control and shift levers
Bucket position indicator

BACKHOE
Power Lift
Over center design, Fabricated “S” boom
Pro Control System
Dipperstick Integrated Serrated Grip Teeth
17, 940 lb·ft (24 370 N·m) swing torque
Case attachment coupler
Foot swing w/ 3 lever controls
Wing stabilizers w/ cleated dirt pad

POWERTRAIN
Standard Powershuttle, 4F-4R Powershuttle Synchromesh transmission, manual gear shift, fully synchronized
Front Axle
4WD heavy-duty mechanically driven front axle w/ 14 x 17.5 tires, limited slip differential and drive shaft guard
Rear Axle
4WD heavy-duty outboard planetary drive w/ 21 x 24 tires
12 in (305 mm) Torque Converter
On-the-Go electric 4WD control
Electric F/R shuttle control
Electric differential lock control, push button
Park Brake, spring applied, hydraulic release (SAHR)

HYDRAULICS
Ground Level Remote Hydraulic Test Ports
Variable Displacement Axial Piston Pump:
Maximum Loader Capacity:
  40 GPM @ 2340 psi )151.4 lpm @ 161 bar)
Loader Torque Regulation:
  27.4 GPM @ 3450 psi (103.4 lpm @ 238 bar)Maximum Backhoe Capacity:
  40 GPM @ 3100 psi (151.4 lpm @ 214 bar)
Backhoe Torque Regulation:
  35 GPM @ 3450 psi (132 lpm @ 238 bar)
Heavy-duty oil cooler
7 micron, spin-on oil filter

OTHER
Front tire 12.5/80 x 18, 10 PR
Rear tire 21L x 24, 10 PR
Forward tilt engine hood
Replaceable, molded front bumpers
Front/rear tie downs
Reflective logos
Lights - Cab and Canopy
  (2) Rear tail/stop
  (2) Front flashers/turn
  (2) Rear flashers/turn
Cab only
  (2) front driving lights (55 w)
  (2) front, 2 side (left & right) & 4 rear adjustable
  halogen work lights (55 w)
Canopy only
  (2) front driving lights (55 w)
  (2) side (left & right) & 2 rear adjustable
  halogen work lights (55 w)

OPERATOR’S COMPARTMENT
Auto Ride Control - 4WD models
Standard Ride Control - 2WD models
Comfort Steering with momentary latching switch, two speed steering pump and 3rd/4th gear cutout.
ROPS/FOPS certified protective cab w/rear wipers and floor mat
Cab Convenience Package containing:
Pull-down sunvisor
Window washer, front and rear
Left-hand storage tray
Deluxe interior package
Tilt steering column
Sound Reduction Package for cab models - levels reduced to 72 dB (A)
Right-hand threshold storage box
Viscous Fan
Pull down sunvisor for canopy models
Radio, AM/FM Stereo/WB, MP3 aux input

LOADER
Auxiliary hydraulics for loader mounted equipment with thumb-operated proportional control
Hydraulic front quick coupler
Loader linkage w/o loader bucket
Tool portfolio of additional attachments


BACKHOE
Gripper teeth extensions on dipper
Thumb-operated unidirectional auxiliary hydraulics with low flow from 0 to 36 gal/min (0 to 136 L/min)
Thumb-operated bi-directional auxillary hydraulic control
Hydraulic bucket quick coupler
Bucket retrofit kit
Flip over stabilizer pads
Cemetery/Street pads


ENGINE
Block Heater
Cold weather starting aid w/ dual 12 volt batteries

POWERTRAIN
Powershift S-Type transmission, 4F-3R fully synchronized electronic transmission controller and kick down in loader control lever (2WD or 4WD)
Powershift H-Type transmission, 4F-3R hydraulic clutch shifting with auto function

HYDRAULICS
Auxiliary backhoe uni-directional hydraulics
Auxiliary backhoe bi-directional hydraulics
Hand lever operated for manual controls
Button operated for pilot controls

OTHER
Electrical Master Disconnect Switch and Remote Jump Start
Special paint
Lift hooks - export
Front counterweights - 700 and 1,100 lb (318 and 500 kg)
Rotating Beacon
Export protection package

ENGINE  
Emission Rating Interim Tier 4
Engine make / model CASE F5C
Gross power - hp (kW) 97 (72)
Net power - hp (kW) 95 (71)
Rated rpm 2200
Net Peak Torque - lbf / ft (Nm) 334 (453)
Displacement - Inches³ (ltr) 207 (3.4)
Transmission type Powershift
Max speed - mph (kph) 24.1 (38.8)
Service brake type Wet Disc
Front Tires 4WD 12.5 / 80 - 18
Rear Tires 4WD 21L - 24
   
HYDRAULIC SYSTEM  
Main Pump Type Variable Displacement Axial Piston
Backhoe Flow - gallons (US) / min (lt/min) 41 (155.2)
   
PERFORMANCE-LOADER  
Lift Capacity to Full Height - lbs (kg) 8425 (3822)
Arm breakout force - lbf (kN) 10874 (48.37)
Loader Bucket Heaped Capacity - yd³ (m³) 1.3 (0.99)
   
FIXED LENGTH DIPPER STICK  
Dig Depth 2ft (0.61m) Flat Bottom - ft/in (mm) 14 ft 5 in (4390)
Bucket digging force - lbf (kN) 13576 (60.4)
Dipper stick digging force - lbf (kN) 8657 (38.5)
Dipperstick Lift Capacity @ 12' Height - lbs (kg) not published
Transport Height - ft/in (mm) 11 ft 1 in (3370)
   
EXTENDABLE DIPPER STICK (RETRACTED)  
Dig depth - 0.6m (2') flat bottom - ret - ft/in (mm) 14 ft 5 in (4390)
Boom lift at max reach - ret - lbs (kg) not published
   
DIMENSIONS  
Transport Length - ft/in (mm) 23 ft 4 in (7110)
Transport Width - ft/in (mm) 7 ft 8 in (2330)
Transport Height - ft/in (mm) 11 ft 7 in (3530)
Height To Top Of Cab - ft/in (mm) 8 ft 11 in (2730)
Wheelbase 4WD - ft/in (mm) 7 ft 1 in (2150)

Turning Radius at curb, 4WD brakes
applied - ft/in (mm)

not published
Operating Weight, 4WD - lbs (kg) 19985 (9065)
Fuel Tank - gallons (US) (ltr) 42 (159)

Base & Extended Warranty Coverage
*1 Year / Unlimited Hour Full Coverage Base Warranty 2 Year / 2,000 Hour Extended Warranty at No Charge

Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.  Drive Train Warranty - Drive (flex) plates / flywheel, drive axle assembly, drive couplings, drive shafts / universal joints, final drive / planetary, hydraulic drive motor, hydraulic drive pump, hydraulic pump when used as a power source for drive pump or drive motor, propulsion planetary drive, pump drive coupling, pump drive gearbox, seals in idlers and rollers, swing reducer transmission, torque converter, track steering brakes and clutch, transfer gear group, transmission charge pump, transmission / transmission control valve, transmission electronic controller, trencher drive gearbox, turntable bearing / swing gear / hydraulic swivel, and wet brakes / wet clutch.

Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost. Your Case dealer can help you determine the plan that fits your needs. Plans are available up to six-years / 7,500 hours on Case Loader/Backhoe models.*Please see your Case dealer for limitations, exclusions, and confirmation of policies in effect. The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine Case service parts or Case approved service parts that meet Case specifications must be used for maintenance and repairs.

  • Augers

    We offer a selection of five models of planetary drive augers drive units to match the size and flow range of your machine. Choose from 2" hex or 2-9/16 round output shafts for most models and a full line of auger bits to meet your job requirements.

  • Brooms, Angle

    Clean up with a quick attach Case angle broom. Great for final street repair preparation, cleaning sidewalks, parking lots and streets, and light snow removal.

  • Bale Spears (LB/LTC)

    Quick coupler mount bale spear lets you move and stack large bales with ease, then move onto other jobs.

  • Brooms, Collector

    CS High Dump Collector Sweeper with floating suspension, 26" diameter poly/wire combination brush, Parallel arm floating arm suspension with 4 caster wheels allows sweeper to follow ground contour independent of loader.

  • Buckets, 4x1 (LB/LTC)

    Quick coupler mount 4x1 buckets are your job site multi-tool. Load, doze, clam and scrape with a single attachment.

  • Buckets, General Purpose (LB/LTC)

    75 and 83" Buckets - For general-purpose applications, 1/4" reinforced wrappers and end plates, 1/2" thick wear bars, wear-resistant Pacal steel tapered cutting edge 96" Bucket - For light material/snow applications, 7 guage reinforced wrappers and end plates, 1/2" thick wear bars, wear-resistant Pacal steel tapered cutting edge

  • Buckets, Light Material

    Ideal for snow and light construction materials, Rolled shell for easy filling & clean-up, Full cross member torque tubes top and bottom for long term durability.

  • Couplers - Quick Attach

    For bale spears, buckets, forks, brooms, augers, snow blades, etc. Get more out of your machine with quick attach couplers and attachments. Move easily from job to job using a single machine and a variety of quick change attachments. Available in manual or hydraulic versions.

  • Grader Rakes

    Great for grading, maintenance and cleanup.

  • Grapple, Scrap (LB)

    Heavy-duty use: demolition, debris, scrap metal, and loose piping. Handles odd-shaped and long-length materials.

  • Hydraulic Hammers *NEW*

    Ideal for demolition, construction, road maintenance, the Hydraulic Hammers attachment comes with a 2-year warranty and provides you with 2 moving parts, a low pressure gas charge, and a low hydraulic surge.

  • Manure Fork

    Farm forks move waste and loose materials easily. Optional grapple attachment clamps load in place, reducing spillage.

  • Pallet Forks (LB)

    Standard brick guard, lock in position clips.

  • Snow Blades (Standard Duty)

    Adjustable skid shoes, spring loaded trip protection. Blade angle 30 degree maximum.

  • Snow Push

    Moves large volumes of snow efficiently.

Tier 4 Engine Solutions

In this article we’ll look at five key product categories (wheel loaders, excavators, dozers, backhoes and skid steers) and how Tier 4 solutions match up with their applications.

Size: 573 kbDownloaddl

Fuel System Maintenance

In this article we will examine a number of factors for optimal fuel system health, as well as a few critical maintenance practices to ensure safety and performance.

Size: 178 kbDownloaddl