• Printer Friendly Version
• Export to Excel

OPERATOR’S COMPARTMENT

• Isolation mounted ROPS/FOPS canopy with headliner and floormat

• Vinyl suspension seat w/back adjustment & adjustable armrests

• Retractable seat belt, 2 in (51 mm)

• Foot rests

ENGINE

• Case 667TA/E66

• Automatic fan belt tensioner

• Integral engine oil cooling

• Fuel filter

• Dual element radial seal air cleaner

• 90 amp alternator

• 700 CCA 12-volt battery

• Anti-sandblast radiator

• Engine side panels

• Anti-freeze to -34°F

• Pusher fan

POWERTRAIN

• Dual path infinitely variable, single-lever controlled hydrostatic drive with electronic straight tracking, power turns & counter-rotatation, 4-position forward/reverse ratio control

• Final drive – Triple reduction – helical gear/planetary. decelerator with hydrostatic drive
  retardation

• Automatic spring applied hydraulic release parking brake

BLADE

• 52° - 60° variable pitch with integral adjustment tool

• Single lever control for blade lift, angle and tilt

UNDERCARRIAGE

• Easy clean track covers

• Hydraulic track adjusters

• Case Lubricated Track Chain

• Permanently lubricated track and carrier rollers

• Track adjuster guard

• Track guides (front and rear)

• Shock resistance idler mounting

OTHER

• Backup alarm

• Horn

• Anti-vandalism package

• Mirror

• Pre-cleaner

• Operator’s manual enclosure

• Master disconnect switch

• Front pull hook

• Hand throttle

• Decelerator

• Final drive seal guard

• O-ring face seal hydraulic fittings

• Vertical spin-on hydraulic & fuel filters

• Hinged grill with tether

• Tool storage area

OPERATOR’S COMPARTMENT

• Cab (w/heater, 25,598 BTU (7.5 kW)/hr air conditioner, defroster, front windshield washer and 2F-1R lights)

• 3 in (76 mm) seat belt

• Deluxe air suspension seat

HYDRAULICS

• 4 spool hydraulic valve for field-installed ripper

REAR MOUNTED EQUIPMENT

• Ripper, parallelogram 5 slot with 3 shanks

BLADES

• 104 in (2.6 m) or 110 in (2.8 m) XLT w/18 in (457 mm) shoes

• 110 in (2.6 m) or 120 in (3.0 m) WT w/24 in (610 mm) shoes

• 124 in (3.2 m) or 130 in (3.3 m) LGP w/28 in(711 mm) shoes

GUARDS

• Sweeps

• Center rockguard

SCREENS

• Rear ROPS and cab

• Side ROPS

• Radiator brush

OTHER

• Lights – halogen, 4 front, 2 rear for cab or ROPS

• Counterweight, front

• Retrieval hitch

• Drawbar

• Special paint

• Case Extended Life Track

• Cold start aid and dual batteries

• Turbo precleaner

• Winch drive

Base & Extended Warranty Coverage*
1 Year / Unlimited Hour Full Coverage Base Warranty

2 Year / 2,000 Hour Extended Warranty at No Charge
Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.

Cummins Engine warranted/repaired by Cummins

Purchased Protection
Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost.  Your Case dealer can help you determine the plan that fits your needs.  Plans are available up to six-years / 7,500 hours on Case Crawler Dozer models.

*Please see your Case dealer for limitations, exclusions, and confirmation of policies in effect.  The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity.  Genuine Case service parts or Case approved service parts that meet Case specifications must be used for maintenance and repairs.