1650L

1650L
Six-Cylinder Case Family IV Tier III engine maximizes power and increases fuel efficiency.
High-performance hydrostatic drive delivers power independently to each track so you can push a full blade through curves and turns.
Infinitely adjustable steering options provide precise and easy operation.
High-performance blade hydraulics feature large pump cylinders that deliver speed and power for optimum control and breakout force.
Blade pitch is easily adjusted to best match soil conditions.
Three track options provide maximum versatility and include Extra Long Track (XLT), Wide Track (WT) and Low Ground Pressure (LGP).
Isolation-mounted operator platform cushions your body from the effects of noise and vibration.
Easy-to-reach daily service checkpoints get your day off to a fast and productive start.
Tilt-over operator platform provides convenient access to the drivetrain.
Swing-out doors and spin-on filters make routine maintenance easy.
Blade Width126" | 3200 mm
Number of Shoes40, 45
Gross Engine Power @ RPM156 hp | 116 kW
Engine Make and ModelCase 667TA/EDJ
Operating Weight33714-35203 lb | 15290-15965 kg
Blade Capacity4.12 yd3 | 3.15 m3
Drawbar Pull at Stall61,846 lb-ft | 275.1 kN
Track on Ground101.4-119.1" | 2525-3025 mm
spec_Height to Top of Cab9'-4" | 2840 mm
Transmission TypeHydrostatic
Number of Bottom Rollers8
Overall Length w/ Drawbar18'-7" | 5660 mm
Shoe Width22, 24" | 560, 610 mm
Net Engine Power144 hp | 107 kW
Number of Rollers2
Track Gauge74" | 1880 mm

OPERATOR’S COMPARTMENT

  • ROPS/FOPS canopy

  • Vinyl suspension seat w/back adjustment

  • Retractable seat belt, 2 in (51 mm)

  • Adjustable armrests

  • Foot rests

  • Tool storage area

  • Headliner

  • Floor mat

  • Entire structure tilts for access

ENGINE

  • Case Family IV 667TA/EDJ

  • Automatic fan belt tensioner

  • Integral engine oil cooling

  • Fuel filter

  • Dual element radial seal air cleaner

  • 65 amp alternator

  • (2) 700 CCA 12-volt batteries

  • Anti-sandblast radiator

  • Engine side panels

POWERTRAIN

  • Dual path infinitely variable, single-lever controlled hydrostatic drive with electronic straight tracking & counter-rotation, 4-position forward/reverse ratio control

  • Final drive – Triple reduction – helical gear/planetary decelerator with hydrostatic drive
    retardation

  • Automatic spring applied parking brake

BLADE

  • 55° - 60° variable pitch with integral adjustment tool

  • Single lever electro hydraulic control for blade lift, angle and tilt

UNDERCARRIAGE

  • Hydraulic track adjusters

  • Case Lubricated Track Chain

  • Permanently lubricated track and carrier rollers and idlers

  • Track adjuster guard

  • Track guides (front and rear)

OTHER

  • Backup alarm

  • Horn

  • Anti-vandalism package

  • Mirror

  • Pre-cleaner

  • Lights - 2 front, 1 rear

  • Rear transmission guard

  • Front pull hook

OPERATOR’S COMPARTMENT

  • Cab (w/heater, defroster, A/C, front windshield washer and lights)

  • ROPS heater

  • 3 in (76 mm) seat belt

  • Deluxe air suspension seat

HYDRAULICS

  • 4 spool hydraulic valve for field-installed ripper

REAR MOUNTED EQUIPMENT

  • Ripper, 3 slot with 3 shanks

BLADES

  • 120 in (3.05 m) XLT w/24 in (610 mm) shoes

  • 132 in (3.35 m) WT w/30 in (762 mm) shoes

  • 132 in (3.35 m) LGP w/34 in (864 mm) shoes

GUARDS

  • ROPS canopy brush guard

  • CAB canopy brush guard

  • Center rockguard

SCREENS

  • Rear ROPS and cab

  • Side ROPS

  • Radiator brush

OTHER

  • Counterweight, front

  • Drawbar, short

  • Drawbar, long

  • Rear retrieval hitch

  • Environmental drains

  • Turbine precleaner

  • Rear wiper for cab

  • Tool box for ROPS

  • PTO equipment pump for winch drive

  • Special paint

  • Case Extended Life Track

  • Grid heater

  • Additional lights (2 front, 1 rear)

Base & Extended Warranty Coverage*
1 Year / Unlimited Hour Full Coverage Base Warranty

2 Year / 2,000 Hour Extended Warranty at No Charge
Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.

Cummins Engine warranted/repaired by Cummins

Purchased Protection
Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost.  Your Case dealer can help you determine the plan that fits your needs.  Plans are available up to six-years / 7,500 hours on Case Crawler Dozer models.

*Please see your Case dealer for limitations, exclusions, and confirmation of policies in effect.  The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity.  Genuine Case service parts or Case approved service parts that meet Case specifications must be used for maintenance and repairs.

Crawler Dozers

Compare Models
ModelNet Engine PowerBlade Width
550H 67-70 hp | 50-52 kW96" | 2440 mm
650L 74 hp | 55 kW90-120" | 2286-3048 mm
650K Series 3 74.8 hp | 56 kW110-124" | 2790-3150 mm
750L 84 hp | 62.6 kW104" | 2642 mm
850L 96 hp | 72 kW104" | 2642 mm
1150K118 hp | 88 kW132" | 3350 mm
1650L144 hp | 107 kW126" | 3200 mm
1850K185 hp | 138 kW134.6" | 3420 mm

Current Promotions

>> Summer extension lease is now available

>> No Payments, No Interest for up to SIX MONTHS on new Case equipment

>> 2 year Equipment Protection on Case crawler dozers

>> 0% for up to 60 months on Case compact track loaders

View All Promotions