CX135SR

CX135SR
Tier III-certified engines have greatly reduced noise levels, one of the lowest fuel consumption rates on the market and meet current environmental standards.
Compact counterweight and boom placement results in a highly productive and maneuverable excavator that’s ideal for restricted conditions.
Power-boost feature delivers added muscle required to operate through extremely tough conditions.
Ergonomically designed controls include one-touch idle, and one- or two- position mode selector for the greatest productivity.
Quick daily service checks from ground level keep the Case excavator on the job for more hours throughout the day.
High performance filtration circuit enables oil change intervals to be extended to every 500 hours.
Extended service intervals provide maximum uptime for your machine.
Ground level fluid checks make daily maintenance quick and easy.
Main Pumps Total Flow - l-min234.4 L-min
Displacement - l2999 cc
Max Reach - m 8.57 m
Max dig depth of vertical wall - m5080 mm
Arm Length - m2850 mm
Operating Wt. - kg13 440 kg
Depth of 8' Bottom - m5720 mm
Reach at Ground Level - m8430 mm
Drawbar Pull - kN115 kN
Dump Height - m7.13 m
Arm Breakout Force, Boost, SAE - kN59.6 kN
Bucket Breakout Force, Boost, SAE - kN89.7 kN
Max Bucket Size - meter 0.75 m³
Boom Length - m4130 mm
Swing Torque - Nm38 kN
Net engine power - hp / kW 95 hp | 70.9 kW
Max Dig Depth - m5.91 m
Tailswing Radius - m1480 mm
  • One-piece boom or double offset boom
  • Steel tracks steel track pads 600 mm
  • High performance “ULTRA CLEAN” (1μ) filtration system
  • “Auxiliary” control valve section
  • Undercarriage with or without Dozer blade
  • 500, 600 or 700 mm steel track pads
  • Rubber track pads 500 mm
  • 2 travel speeds
  • Load-holding valves (boom and dipper)
  • Tier 2 engine (reduced smoke emissions and noise level)
  • Electronically motor speed control
  • Automatic engine speed return to idle
  • RH, LH and rear rear-view mirror (safety when swinging and revers)

  • Single-acting system (“hammer” type)

  • “Multipurpose” circuit (hammer or shears)

  • Double-acting circuit (shears, etc.)*

  • 2nd auxiliary circuit (clamshell orientation type)*

  • Backhoe-clamshell circuit*

  • “MULTIFIT” Hydraulic quick coupler

  • Electric pump for refuelling

  • FOPS (roof) cab protection

  • Self-regulating air conditioning

  • Steel tracks rubber track pads 600 mm

  • Safety valves (boom - dipper)


* Note: availability of these circuits varies depending on the type of boom and length of the dipper

null

Tracked Excavators

Compare Models
ModelNet engine power - hp / kWOperating Wt. - kg
CX75SR 54 hp | 40 kW 7923 kg
CX80 54 hp | 40 kW 8430 kg
CX135SR 95 hp | 70.9 kW13 440 kg
CX130B 95 hp | 71 kW27,800 lb | 12 610 kg
CX160B120 hp | 89 kW17 100 kg
CX180B120 hp | 89.2 kW17 900 kg
CX225SR153 hp | 114,4 kW 53.223 lb | 24 141 kg
CX230B157 hp - 117 kW23 600 kg
CX210B157 hp | 117 kW47,400 lb | 21 500 kg
CX240B177 hp | 132 kW25 000 kg
CX290B207 hp | 154 kW29 800 kg
CX370B275 hp - 202 kW36 200 Kg
CX350B275 hp - 202 kW 34 200 kg
CX470B362 hp | 270 kW103,800 lb | 47 083 kg
CX700B463 hp | 345 kW69 558 kg
CX800B495 hp | 369 kW79 474 kg