CX225 MSR

CX225 MSR
Tier III-certified engines have greatly reduced noise levels, one of the lowest fuel consumption rates on the market and meet current environmental standards.
Compact counterweight and boom placement results in a highly productive and maneuverable excavator that’s ideal for restricted conditions.
Power-boost feature delivers added muscle required to operate through extremely tough conditions.
Ergonomically designed controls include one-touch idle, and one- or two- position mode selector for the greatest productivity.
Quick daily service checks from ground level keep the Case excavator on the job for more hours throughout the day.
High performance filtration circuit enables oil change intervals to be extended to every 500 hours.
Main Pumps Total Flow100.4 gpm | 380 L-min
Displacement317 in3 | 5193 cc
Max Reach32'-6" | 9.91 m
Max Dig Depth of Vertical Wall19'-11" | 6060 mm
Arm Length9'-10" | 2997 mm
Operating Weight53,223 lb | 24 141 kg
Depth of 8' Bottom21'-5" | 6520 mm
Reach at Ground Level31'-11" | 9730 mm
Drawbar Pull42,039 lb | 187 kN
Dump Height26'-4" | 8020 mm
Arm Breakout Force, Boost, SAE21,357 lbf | 95 kN
Bucket Breakout Force, Boost, SAE29,225 lbf | 130 kN
Max Bucket Size1.53 yd3 | 1.17 m3
Boom Length18'-8" | 5700 mm
Swing Torque52,700 lbf | 71.5 kN
Net Engine Power153 hp | 114.4 kW
Max Dig Depth22'-0" | 6700 mm
Tailswing Radius5'-8" | 1720 mm

OPERATOR’S COMPARTMENT

  • Cab with Isomount® system
  • Adjustable deluxe seat with
  • 3 in (76 mm) seat belt
  • Safety glass
  • Air conditioning
  • AM/FM Radio w/auto tuner
  • Skylight
  • Sliding front windows
  • Windshield wiper w/washer

ENGINE

  • Isuzu AI-4HK1X turbocharged diesel

  • Tier III certified

  • Glow plug

  • Selectable one touch or auto accelerator/decelerator

ELECTRICAL

  • Batteries (2) 12-volt

  • Horn

HYDRAULICS

  • ISO pattern pilot controls

  • Position mode selector: S & E

  • Power Boost

  • Variable flow piston pumps

  • Auxiliary attachment mode

  • Neutral pump destroke

  • Auxiliary hydraulic valve

  • Boom and arm anti-drift valves

  • Ultra Clean filtration system

UNDERCARRIAGE

  • Shoes: 31.5 in (800 mm) 3-bar, 49 per side

  • Track length: 14 ft 8 in (4.46 m)

  • Track gauge: 7 ft 10 in (2.39 m)

TRACK DRIVE

  • 2-speed hydrostatic travel

  • Straight tracking travel priority

  • Disc-type parking brakes

UPPERSTRUCTURE

  • Boom: 18 ft 8 in (5.70 m) one piece

  • Free swing control

  • Hammer adaptable, no reinforcing required

  • Swing brake

OTHER

  • Counterweight: 13,095 lb (5940 kg)

  • Single key vandal lockup

UPPERSTRUCTURE

  • Arm: 9 ft 10 in or 7 ft 10 in (3.00 m or 2.40 m)

UPPERCARRIAGE

  • Track Shoes: 28 in (700 mm)

  • Track Shoes: 24 in (600 mm)

HYDRAULICS

  • Auxiliary hydraulics

  • Single acting, one pump (includes heavy-duty bucket linkage)

  • Double acting, single or dual pump (includes heavy-duty bucket linkage)

  • Double acting general purpose for use with thumb kit

  • Control pattern selector valve

OTHER

  • Load holding control devices

  • Cylinder mounted

  • Case/JRB Slide-Loc* Hydraulic

  • Coupler

 

Base & Extended Warranty Coverage*
1 Year / 1800 Hour Full Coverage Base Warranty

2 Year / 2,000 Hour Extended Warranty at No Charge
Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.

Note: Warranty does not cover any configuration excavator equipped with feller buncher or accumulator attachments.

Purchased Protection
Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost.  Your Case dealer can help you determine the plan that fits your needs.  Plans are available up to six-years / 7,500 hours on Case Excavator models.

*Please see your Case dealer for limitations, exclusions, and confirmation of policies in effect.  The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity.  Genuine Case service parts or Case approved service parts that meet Case specifications must be used for maintenance and repairs.

Excavators - Standard

Compare Models
ModelNet Engine PowerOperating Weight
CX75 MSR 54 hp | 40 kW17,468 lb | 7923 kg
CX80 54 hp | 40 kW18,585 lb | 8430 kg
CX135 MSR95 hp | 70.9 kW29,631 lb | 13 440 kg
CX130B95 hp | 71 kW27,800 lb | 12 610 kg
CX160B120 hp | 89 kW37,700 lb | 17 100 kg
CX225 MSR153 hp | 114.4 kW53,223 lb | 24 141 kg
CX210B157 hp | 117 kW47,400 lb | 21 500 kg
CX240B177 hp | 132 kW55,120 lb | 25 000 kg
CX290B207 hp | 154 kW65,697 lb | 29 800 kg
CX350B271 hp | 202 kW79,065 lb | 35 863 kg
CX470B362 hp | 270 kW103,800 lb | 47 083 kg
CX700B463 hp | 345 kW153,400 lb | 69 558 kg
CX800B532 hp | 397 kW178,575 lb | 81 000 kg

Current Promotions

>> Learn more about the Case Economic Stimulus Plan

>> No Payments, No Interest for up to SIX MONTHS on new Case equipment

>> Free 2-Year, 2,000-Hour Powertrain Protection Plan on All 400 Series Skid Steer and Compact Track Loaders

>> Free 2-Year, 2,000-Hour Powertrain Protection Plan on All 400 Series Skid Steer and Compact Track Loaders

View All Promotions