CX75 MSR

CX75 MSR
Tier III compliant engines have greatly reduced noise levels, one of the lowest fuel consumption rates on the market and meet current environmental standards.
Compact counterweight and boom placement results in a highly productive and maneuverable excavator that’s ideal for restricted conditions.
An available offset boom pivots at a joint between the arm and boom, allowing the bucket to be placed off center for parallel digging – even beyond the edge of the machine’s own tracks.
Ergonomically designed controls include one-touch idle, and one- or two- position mode selector for the greatest productivity.
Quick daily service checks from ground level keep the Case excavator on the job for more hours throughout the day.
High performance filtration circuit enables oil change intervals to be extended to every 500 hours.
Main Pumps Total Flow36 gpm | 136 L-min
Displacement133 in3 | 2179 cc
Max Reach22'-8" | 6.90 m
Max Dig Depth of Vertical Wall13'-5" | 4100 mm
Arm Length6'-11" | 2120 mm
Operating Weight17,468 lb | 7923 kg
Depth of 8' Bottom14'-0" | 4260 mm
Reach at Ground Level22'-3" | 6770 mm
Drawbar Pull13,331 lb | 59 kN
Dump Height18'-2" | 5540 mm
Arm Breakout Force, Boost, SAE7,644 lbf | 34 kN
Bucket Breakout Force, Boost, SAE12,792 lbf | 56.9 kN
Max Bucket Size0.45 yd3 | 0.34 m3
Boom Length12'-8" | 3870 mm
Swing Torque14,060 lbf | 20.4 Nm
Net Engine Power 54 hp | 40 kW
Max Dig Depth14'-11" | 4540 mm
Tailswing Radius4'-1" | 1240 mm

OPERATOR’S COMPARTMENT

  • Cab with Isomount® system

  • Adjustable deluxe seat with 3 in (76 mm) seat belt

  • Safety glass

  • Air conditioning

  • AM/FM Radio w/auto tuner

  • Skylight

  • Sliding front windows

  • Windshield wiper w/washer

ENGINE

  • Isuzu AU-4LE2X diesel

  • Tier III compliant

  • Glow plug

  • Selectable one touch accelerator/decelerator

ELECTRICAL

  • Batteries (1) 12-Volt

  • Horn

HYDRAULICS

  • ISO pattern pilot controls

  • Position mode selector: S

  • Variable flow piston pumps

  • Neutral pump destroke

  • Auxiliary hydraulic valve

  • Boom anti-drift valves

  • Ultra Clean filtration system

UNDERCARRIAGE

  • Shoes: 17.7 in (450 mm) 3-bar, 39 per side

  • Track length: 9 ft 4 in (2.85 m)

  • Track gauge: 6 ft 2 in (1.87 m)

  • Dozer blade

TRACK DRIVE

  • 2-speed hydrostatic travel

  • Disc-type parking brakes

UPPERSTRUCTURE

  • Boom: 12 ft 8 in (3.87 m) one piece

  • Hammer adaptable

  • Swing brake

OTHER

  • Counterweight: 3,020 lb (1370 kg)

  • Single key vandal lockup

UPPERSTRUCTURE

  • Arm: 6 ft 11 in (2.18 m)

  • Offset boom: 12 ft 10 in (3.92 m)

  • Arm for offset boom: 5 ft 9 in (1.74 m)

UPPERCARRIAGE

  • Track Slides: 24 in (600 mm)

  • Rubber Link Track

HYDRAULICS

  • Auxiliary hydraulics

  • Single acting, one pump (includes heavy-duty bucket linkage)

  • Double acting, single or dual pump (includes heavy-duty bucket linkage)

  • Double acting general purpose for use with thumb kit

  • Control pattern selector valve

OTHER

  • Load holding control devices

  • Cylinder mounted

  • Case/JRB Slide-Loc*

  • Hydraulic Coupler

Base & Extended Warranty Coverage*
1 Year / 1800 Hour Full Coverage Base Warranty

2 Year / 2,000 Hour Extended Warranty at No Charge
Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.

Note: Warranty does not cover any configuration excavator equipped with feller buncher or accumulator attachments.

Purchased Protection
Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost.  Your Case dealer can help you determine the plan that fits your needs.  Plans are available up to six-years / 7,500 hours on Case Excavator models.

*Please see your Case dealer for limitations, exclusions, and confirmation of policies in effect.  The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity.  Genuine Case service parts or Case approved service parts that meet Case specifications must be used for maintenance and repairs.

Excavators - Standard

Compare Models
ModelNet Engine PowerOperating Weight
CX75 MSR 54 hp | 40 kW17,468 lb | 7923 kg
CX80 54 hp | 40 kW18,585 lb | 8430 kg
CX135 MSR95 hp | 70.9 kW29,631 lb | 13 440 kg
CX130B95 hp | 71 kW27,800 lb | 12 610 kg
CX160B120 hp | 89 kW37,700 lb | 17 100 kg
CX225 MSR153 hp | 114.4 kW53,223 lb | 24 141 kg
CX210B157 hp | 117 kW47,400 lb | 21 500 kg
CX240B177 hp | 132 kW55,120 lb | 25 000 kg
CX290B207 hp | 154 kW65,697 lb | 29 800 kg
CX350B271 hp | 202 kW79,065 lb | 35 863 kg
CX470B362 hp | 270 kW103,800 lb | 47 083 kg
CX700B463 hp | 345 kW153,400 lb | 69 558 kg
CX800B532 hp | 397 kW178,575 lb | 81 000 kg

Current Promotions

>> Learn more about the Case Economic Stimulus Plan

>> No Payments, No Interest for up to SIX MONTHS on new Case equipment

>> Free 2-Year, 2,000-Hour Powertrain Protection Plan on All 400 Series Skid Steer and Compact Track Loaders

>> Free 2-Year, 2,000-Hour Powertrain Protection Plan on All 400 Series Skid Steer and Compact Track Loaders

View All Promotions