new favorite added


Crawler Dozers




Model FPT F4HFA613L*E002 Tier 2
Cylinders 6
Displacement 6.7 l
Fuel injection Direct
Fuel filter Spin-on w/ in-line strainer
Air intake Cross-flow
Cooling Liquid
Engine speeds RPM
High idle – no load 2200 +/- 50
Rated – full load 2000
Low idle 1100 +/- 25
Horsepower SAE J1349
Engine rated net power 127 hp - 95 kW @ 2200 rpm
Engine max net power 138 hp - 103 kW @2200 rpm
Rated net torque 612 Nm
Max net torque 632 Nm
Engine lubrication
Pump Deep sump plate cooler w/ pressurized under-piston nozzles
Pump operating angle ratings
Side-to-side 35°
Fore and aft 45°
Core size area (Water Radiator) 0.26 m²
Rows of tubes 25
Diameter 662 mm
Ratio 0,96:1
Dual path hydrostatic
Pump Variable axial piston
Motor Variable bent axis piston
Max. drawbar pull* 213.5 kN
Transmission Single lever control electronic straight tracking
Oil filter 2 micron, spin-on, replaceable
Travel speeds*
Forward 0 – 9.3 km/h
Reverse 0 – 9.3 km/h
Parking brakes Heavy-duty, spring-applied, hydraulic pressure release
Steering brakes Hydrostatic
Final drive 2 helical gear reduction to planetary output
Ratio 61.4:1
Type Oil to air
Core size 0.41m²
Alternator 120 amps
Batteries (2) 12-volt, low-maintenance 925 cold-cranking amps @ -18°C
Operator Environment ROPS/FOPS cab; Pneumatically suspended seat; Seat belt; Adjustable armrests; Foot rests;
Tool storage area; Headliner; Floor mat; Mirror; Noise level 78dbA
Warning lights Air filter; Alternator; Diagnostic fault indicator; Engine coolant temperature; Engine oil pressure;
Hydraulic filter; Low fuel level; Park brake engaged; Service soon indicator; Transmission filter;
Transmission charge pressure
Gauges Battery voltage; Digital hourmeter/tachometer diagnostic/service reminder; Fuel level;
Transmission oil temperature; Transmission speed indicator; Water temperature
Audible warnings Engine coolant temperature; Engine oil pressure; Low fuel level, Transmission charge pressure;
Transmission/hydraulic temperature; Rear wiper for cab; Internal mirror; Radio

* Measured using standard track chain. Increase travel speeds by 4% and reduce drawbar pull by 4% w/ the optional CELT track chain

Pump flow @ 2200 RPM 137 l/min
Max pressure 206 bar
Lift cylinder™ nr. 2
Bore diameter 108 mm
Rod diameter 50.8 mm
Stroke 488 mm
Angle cylinder nr. 2
Bore diameter 114.3 mm
Rod diameter 63.5 mm
Stroke 465.7 mm
Tilt cylinder nr. 1
Bore diameter 127 mm
Rod diameter 63.5 mm
Stroke 148.3 mm
Fuel tank 322 l
Engine oil w/ filter 16.4 l
Engine oil w/o filter 15.6 l
Engine cooling system 26.5 l
Hydraulic reservoir 116.4 l
Final drive (per side) 14.2 l
Track rollers (ea) 0.275 l
Front idlers (ea) 0.225 l
Carrier rollers – each 0.334 l
Track adjustment Hydraulic
Frame Oscillating equalizer beam suspension and pivot shaft
Track link pitch 175 mm
Track shoe height 52.5 mm
Pin diameter 36.58 mm
Bushing diameter
CLT track 62 mm
CELT track 79 mm
Track shoes per side
CLT track 43
CELT track 43
Track rollers per side 7
Carrier rollers per side 2
Track roller rail diameter 190 mm
Track on ground
Shoe area
508 mm 26323 cm²
559 mm 28965 cm²
660 mm 34199 cm²
762 mm 39484 cm²
Variable blade pitch 55° +/- 5°
Lift speed – per second 503 mm
Cutting edge Reversible, replaceable
Width 203.2 mm
Thickness 19.1 mm
Max. penetration 478 mm
Width 1711 mm
Cut 1635 mm
Max. ground clearance 424 mm
Max. number of shanks 3
Tooth spacing w/3 teeth 785 mm
Hydraulic cylinder Double-acting
Diameter 102 mm
Stroke 254 mm
Rod 51 mm


Your search for world-class equipment, industry-leading aftermarket support and flexible financing starts here.

To start your search, please enter the following information:

Search now

type to search what are you looking for:

0 result found
filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favourites

0 result found

By using our website you are consenting to our use of cookies in accordance with our Cookie Policy