new favorite added

Products

Crawler Dozers

1650M

  • Power 122 kW / 164 hp
  • Blade Capacity 4.84 m³ Semi-U, 3.99 m³ Straight PAT, 4.04 m³ Foldable PAT

1650M

The perfect equipment for:
  • Infrastructure
    Infrastructure
  • Recycling
    Recycling
  • Quarrying
    Quarrying
Downloadables:
Crawler Dozers
Crawler Dozers
File size 3.45 Mb

Specifications

ENGINE
Model FPT F4HFE6132*A004
Cylinders 6
Displacement 6.7 l
Fuel injection Direct common rail
Fuel filter Spin-on w/ in-line strainer
Air intake Cross-flow
Cooling Liquid
Engine speeds RPM
High idle – no load 2200 +/- 50
Rated – full load 2200
Low idle 800 +/- 25
Horsepower SAE J1349:
Engine rated net power 150 hp - 112 kW @ 2200 rpm
Engine max net power 164 hp - 122 kW @ 2200 rpm
Engine Peak Power 173 hp -129 kW @ 1800 rpm
Rated net torque 666 Nm
Max net torque 726 Nm
Engine lubrication
Pump Deep sump plate cooler w/ pressurized under-piston nozzles
Pump operating angle ratings:
Side-to-side 35°
Fore and aft 45°
Radiator:
Core size area (Water Radiator) 0.33 m²
Rows of tubes 4
Fan
Diameter 700 mm
Ratio hydraulically driven
POWERTRAIN
Dual path hydrostatic
Pump Variable axial piston
Motor Variable bent axis piston
Max. drawbar pull* 272 kN
Transmission Single lever control electronic straight tracking
Oil filter 2 micron, spin-on, replaceable
Travel speeds* Forward 0 – 9.3 km/h
Travel speeds* Reverse 0 – 9.3 km/h
Parking brakes Heavy-duty, spring-applied, hydraulic pressure release
Steering brakes Hydrostatic
Final drive 2 helical gear reduction to planetary output
Ratio 61.4:1
TRANSMISSION COOLING
Type Oil to air
Core size 0.31 m²
SERVICE CAPACITY
Fuel tank 322 l
AD Blue Tank 52 l
Engine oil w/ filter 16.4 l
Engine oil w/o filter 15.6 l
Engine cooling system 32 l
Hydraulic reservoir 160 l
Final drive - per side 15 l
Track rollers - each 0.25 l
Front idlers - each 0.33 l
Carrier rollers - each 0.27 l
UNDERCARRIAGE
Track adjustment Hydraulic
Frame Oscillating equalizer beam suspension and pivot shaft
Track link pitch
"Heavy-Duty" track 190 mm
"Ultra-Life" track 190 mm
Track shoe height 56 mm
Pin diameter 38 mm


* with 610 mm shoes and PAT blade

Bushing diameter
"Heavy-Duty" track 65 mm
"Ultra-Life" Track 86 mm
Track shoes per side 45
Track rollers per side 8
Carrier rollers per side 2
Track roller rail diameter 203 mm
ELECTRICAL SYSTEM
Alternator 120 amps
Batteries (2) 12-volt, low-maintenance 925 cold-cranking amps @ -18°C
OPERATOR ENVVIROMENT
Operator environment ROPS/FOPS cab; Pneumatically suspended seat; w/ back adjustment; Seat belt; Adjustable armrests; Foot rests; Tool storage area; Headliner; Floor mat; Tilting seat platform; Noise Level 75 dbA.
Warning lights Air filter; Alternator; Diagnostic fault indicator; Engine coolant temperature; Engine oil pressure; Hydraulic filter; Low fuel level; Park brake engaged; Service soon indicator; Transmission filter; Transmission charge pressure.
Gauges Battery voltage; Digital hourmeter/tachometer diagnostic/service reminder; Fuel level; Transmission oil temperature; Transmission speed indicator; Water temperature.
Audible warnings Engine coolant temperature; Engine oil pressure; Low fuel level, Transmission charge pressure; Transmission/hydraulic temperature.
HYDRAULICS
Pump flow @ 2200 RPM 149 l/min
Max pressure 206 bar
Lift Cylinder PAT nr. 2
Bore diameter 114.3 mm
Rod diameter 63.5 mm
Stroke 428 mm
Angle cylinder PAT nr. 2
Bore diameter 114.3 mm
Rod diameter 63.5 mm
Stroke 502.7 mm
Tilt cylinder PAT nr. 1
Bore diameter 127 mm
Rod diameter 63.5 mm
Stroke 148.3 mm
Lift cyclinder Bull Dozer
Bore diameter 95.3 mm
Rod diameter 57.2 mm
Stroke 906 mm
Tilt cylinder Bull Dozer
Bore diameter 114.3 mm
Rod diameter 63.5 mm
Stroke 98.9 mm
TRACK ON GROUND
Shoe area
560 mm 34509 cm²
610 mm 37650 cm²
710 mm 43892 cm²
820 mm 50128 cm²
860 mm 53338 cm²
PAT BLADE
Variable blade pitch - adjustable 55° +/- 5°
Lift speed - per second 483 mm
Cutting edge Reversible, replaceable
Width 200 mm
Thickness 20 mm
RIPPER
Max. penetration 545 mm
Width 1953 mm
Cut width 1889 mm
Max. ground clearance 611 mm
Max. number of shanks 3
Tooth spacing w/3 teeth 944 mm
Hydraulic cylinder Double-acting
Diameter 155 mm
Stroke 596 mm
Rod 69 mm

FIND A DEALER

Your search for world-class equipment, industry-leading aftermarket support and flexible financing starts here.

To start your search, please enter the following information:

type to search what are you looking for:

0 result found
type
filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favourites

0 result found
X

By using our website you are consenting to our use of cookies in accordance with our Cookie Policy