Wheel Loaders W20G

A clear leader in its segment, the CASE W20G Wheel Loader was designed to tackle the heaviest working conditions. As a result, it stands out for its robustness, simple design, and now with a cabin and new joystick that make it more comfortable and productive than ever.

Those who acquire this machine also benefit from simple maintenance, higher liquidity, and resale value in its category. Not to mention the air conditioning, which now has more diffusers and improved distribution within the cabin.

MAKE A QUOTE

TIPPING LOAD

6.108 kg

BUCKET VOLUME

From 1.7 to 5 m³

Specifications

Standard Equipment

ROPS/FOPS cab with air conditioning and heater. Complies with ISO 3471, 3449, SAE 1040C, J231, OSHA standards
Radio
Key start
Articulated hydraulic steering with adjustable column
Suspension seat, fully adjustable
Throttle pedal
Single control lever with wrist support
Cup holder
Coat hook
Interior rearview mirror
51 mm (2”) retractable seatbelt
Storage tray behind the seat
Air conditioning
Single pedal brake
F/N/R gear switch
Exterior rearview mirrors
Refrigerated box
Pressurized air filtration
Defroster
Side window, full/partial opening
Ceiling light
Front and rear windshield wipers
Turn signal
Front and rear windshield washers
Lockable glove compartment
Comfort kit (cigarette lighter, storage compartment)

FPT Mar-1/Tier 3 certification
Selectable work modes
Maximum power
Automatic power
Standard power
Economic power
Turbocharger
Air intake cooling
Alternator belt automatic tensioner
Integrated engine oil cooling
Fuel filter with water separator
Two-element air filter
65 A alternator
(2) 700 CCA 12 V batteries
Silencer without spark arrestor
Central mounting cooling module
Common Rail electronic fuel injection

Z-linkage arm
Single control for lifting and tilting
Positive float retention
Automatic return to digging
Automatic height control
Automatic return to travel
Transmission disconnection on brake pedal
Bucket position indicator

4-wheel drive
Selectable 4F/3R transmission Automatic/manual
Programmable electronic control module
Computer-controlled proportional gearshift with programmable gear selection
On-board diagnostics
Single lever for electronic gear control
F/N/R gear switch on the loader control lever
Torque converter
External planetary axles
Limited-slip differentials
Transmission oil cooler
Transmission disconnection via brake pedal
Hydraulic brake discs in oil bath
Spring-actuated parking brake, hydraulically released
Limp-Home mode
Cardan with permanent lubrication

Single lever loader control valve with 2 spools
Low-effort steering
Hydraulic fan with reversible function
(8) quick-connect diagnostic ports

Electric hood lift
Front and rear fenders
Headlights: (2) front headlights (high/low), (2) front work lights, (2) rear brake and reverse lights, (2) rear work lights
Front and rear turn signal/hazard indicators
Standard counterweight
Tow pin
Joint locking bar
Lift arm locking bar
Front and rear support and tie-down points
Reverse alarm
Remote drainage points

Specifications

Optional Equipment

Seat with pneumatic suspension covered in fabric
Right side stairs and platform
Rotating light
Second brake pedal

Cold climate kit

Sugarcane Version:
Cyclonic pre-filter at the engine and air conditioning intake for better system efficiency and to prevent blockages
Bucket sized for handling sugarcane bagasse
Chassis with openings to prevent material buildup
Fire extinguisher
Granite Extraction (block handling):
Special bucket and counterweight for heavy-duty work
Rock Extraction:
HD bucket, counterweight, and tires for heavy-duty work