850M

The PAT blade is particularly appreciated for its ease of operation and application flexibility, improving operator comfort and increasing machine productivity. With 4 movements, in addition to raising/lowering, rotating, and tilting, the angular movement of the PAT blade allows for cutting and moving earth to the side.

The PAT blade is mounted on a C-shaped force arch that provides greater stability and does not require a wear plate. The horizontal hydraulic cylinders result in a longer lever arm and a quicker response.

The track belt differential features CLT technology, providing:

• Segmented drive wheel for replacement without disassembling the chains;
• Sealed and lubricated with an oil reservoir at each pin;
• Sealed pins and bushings to maintain lubrication without contaminants. Rollers with optimized spacing, resulting in reduced vibration, increased stability, and better track tension adjustment. Protective cover for the tensioner assembly, reducing material accumulation. Track tensioning valve with extra protection, preventing material from entering the track adjustment orifice.

The tilting seat and floor with a removable cover allow access to key components such as hydraulic pumps, valves, and hoses. Access to hydraulic motors is achieved through an opening at the rear of the chassis.

There are also openings at the bottom of the chassis.

And finally, a technology exclusive to CASE: guide wheel support with 4 springs each, reducing noise and maintaining proper track tension.