Excavator CX220C Series 2
The CX220C Series 2 hydraulic excavator has 20 tons that ensure productivity, enhanced versatility, power, comfortable and safe operations, in addition to easy maintenance.
This excavator model is part of the CASE C series. It has an operating weight of 22.149 kg and 158 hp power.
NET POWER
147,8 hp (110,2 kW)
OPERATING WEIGHT
22.149 kg
Explore the features
Specifications
Standard Equipment
- Oil-damped suspension system with 4 mounts.
- ROPS and FOPS Level 1 protection cab.
- Fabric seat with pneumatic suspension.
- 3-inch seatbelt.
- Automatic air conditioning.
- AM/FM radio with auto-tuning, Bluetooth, and USB port.
- 7-inch control panel with rear and side-view camera options.
- Joystick levers for hydraulic functions.
- Travel pedals with auxiliary manual control levers.
- Footrests.
- Safety lever that neutralizes hydraulic functions with a delay timer.
- Foldable front windshield with limit sensor.
- Solar and tilting roof.
- Intermittent front windshield wiper with two speeds.
- Batteries (2).
- Electronic monitoring and diagnostic system.
- Boom work lights.
- Front cab work lights.
- 90A alternator.
- Standard ISO pilot controls.
- Work mode selector: A, H & SP.
- Auxiliary mode for attachments (hammer, shears, processors, etc.).
- AUTO Power Up.
- Two variable flow piston pumps: 2 x 211 l/min.
- Automatic flow reduction for pumps.
- Cylinders with end-of-stroke cushioning and regenerative system.
- FPT turbocharged Tier 3 / Mar-1 engine.
- Dial-type throttle control.
- Automatic engine deceleration.
- Electronic engine speed control.
- Auto-idle system.
- Cyclonic air pre-filter.
- Boom: 5.700 mm – monoblock.
- Digging arm: 2.400 mm.
- Swing brake electronically managed.
- Swing bearing in grease bath.
- Track shoes: 600 mm with triple grouser.
- Track length: 4.470 mm.
- Track gauge: 2.390 mm.
- Sealed and lubricated tracks.
- Hydrostatic travel system with two speeds.
- Parking brake: disc type (SAHR).
- Centralized lubrication for the monoblock arm.
- GD bucket: 1.3 m³ WD.
Specifications
Optional
- Digging arm: 2.94 m.
- Buckets for general applications, rock, and severe-duty tasks (see table on page 4).
- Track shoes: 700 mm, 800 mm.
- Triple track guides.
- Hydraulic hammer pre-wiring (pedal or joystick).
- Rotating grapple pre-wiring (pedal or joystick).
- Hydraulic shear pre-wiring (pedal or joystick).
- Forest processor pre-wiring.
- Auxiliary lighting.
- Front guard protection.
- Upper guard protection (FOPS Level 2).
- Low-frequency mechanical suspension seat with coil springs and dual-action hydraulic damper.
- Rotating beacon.
- Side-view camera.
- Rear-view camera.
- SiteWatch monitoring system (cellular and/or satellite telemetry) with subscription options for 1, 2, 3, 4, or 5 years.
- Fuel refueling pump.
ENGINE | |||||||||||||||
Brand | |||||||||||||||
Model | |||||||||||||||
Type | |||||||||||||||
Piston displacement | |||||||||||||||
Bore and strok | |||||||||||||||
Voltage | |||||||||||||||
Alternator | |||||||||||||||
Starter | |||||||||||||||
HYDRAULIC SYSTEM | |||||||||||||||
HYDRAULIC CONTROLS | |||||||||||||||
ELECTRICAL SYSTEM | |||||||||||||||
OPERATOR’S ENVIRONMENT | |||||||||||||||