Page added to favorites

Equipment

Motor Grader

885B

More efficiency

High efficiency, high torque, and low consumption engine. Everything for favoring a better performance. These are some of the features of the 885B Motor Grader, which features two power curves (220/234 hp). Considered as a reference due to its design, comfort, and ergonomics, this motor grader also provides an effortless cut, due to its central blade with Roll-Away profile.

A great fit for:
  • Agriculture
    Agriculture
  • Government / Municipalities
    Government / Municipalities
  • Non-Residential Construction
    Non-Residential Construction
  • Rental
    Rental
  • Residential Construction
    Residential Construction
  • Roads & Bridges
    Roads & Bridges
  • Snow Removal
    Snow Removal
  • Waste/Scrap
    Waste/Scrap
  • Mining
    Mining
Downloads
885B - Technical Brochure
885B - Technical Brochure
File size 888.5 KB
CASE Product Line
CASE Product Line
File size 1.23 Mb

Hotspots

FO-Motoniveladoras-Hotspot
F-Motoniveladoras-Hotspot-1

ROPS/FOPS cab, with rounded design and greater glazed area, allowing for more visibility on all directions.

F-Motoniveladoras-Hotspot-2

Central blade with multiradius, involute, curved profile, which allows effortless cutting.

F-Motoniveladoras-Hotspot-3

With the towing bar and the chassis circle, you have much more stability, and the maximum blade turning yield.

FEATURES

Resources

Open Close

CAB

  • Greater vision area.
  • Comfort and ergonomics at the inside environment.

INVOLUTE BLADE

  • Multiple radii.
  • Easy material rolling, thus increasing the earth moved volume.
  • Less stress on the blade, and more fuel savings.

LOAD SENSING TYPE HYDRAULIC SYSTEM

  • The hydraulic pump works in standby, consuming the minimum possible engine power, and when the application demands more flow, it is piloted for supplying the hydraulic system with the required flow, either higher or lower, depending on the operation.

TRANSMISSION

  • 6 speeds.
  • It is coupled to the engine via a torque converter.
  • The converter features a locking system (Lock-up), which transforms it in a rigid coupling, starting to work as a Direct Drive system.
  • The operator can use either the automatic or manual modes.

SELF-ADJUSTING BRAKES

  • Oil bath, multidisc, self-adjusting brakes with two circuits, one for each side of the rear axle.

MAINTENANCE

  • Quick and at low cost.
  • Tilting hood, which improves access to engine components and to daily maintenance points.
  • Lubricating points accessible from ground level.

TOWING BAR AND CHASSIS CIRCLE

  • They provide stability, power, and maximum blade turning yield.

CONTROL LEVERS

  • Within operator’s reach and easy to operate.

RIPPER

  • Rear ripper with three large teeth, in addition to five small teeth and/or five large teeth plus nine small teeth.

SCARIFIER

  • Front scarifier can have up to 11 teeth.

PLASTIC FUEL TANK

  • At ground level, with lock on the lid.

Specifications

Open Close
Engine brand CASE/FPT
Certification Tier-3
Cylinders 6
Bore and stroke 104 x 132 mm (4,09” x 5,2”)
Cylinder volume 6700 cm³ (408,86 in³)
Gross power (SAE J1995) 220/234 hp (164/175 kW) at 2.200 rpm
Net power (SAE J1349) 205/219 hp (153/163 kW) at 2.200 rpm
Hydraulic pump nominal flow 186 l/min (49 gpm) at 2.200 rpm
Transmission ZF
Blade shift (Right / Left) 686 mm (2' 3") / 533 mm (1' 9")
Operating Weight 18.050 kg (39.793 lb)
Weight, front axle 4.970 kg (10.957 lb)
Weight, rear axle 13.080 kg (28.836 lb)
Moldboard width 4.267 mm (14’)
Circle Rotation 360º
Articulation range 25º left/right
Maximum speed (Forward / Reverse) 38,8 / 27,2 km/h (24,1 / 17,0 mph)

Standard Equipment

Open Close

OPERATOR’S COMPARTMENT

  • ROPS/FOPS raised profile (fixed front window) closed cab.
  • Air conditioning (*).
  • Mechanic suspension adjustable seat, cloth lining, 50.8 mm (2”) safety belt.
  • Adjustable operator’s console.
  • Foot-operated accelerator.
  • Hand-operated accelerator.
  • Front upper windshield wiper with washer.
  • Security glass.
  • Ceiling light.
  • Internal and external rearview mirrors.
  • 12 V outlet (*).
  • Automatic ignition main switch.
  • Right- and left-hand side steps.

(*) Only available for closed cab models. All ROPS/FOPS cabs are certified as per SAE J1040 (ROPS) and SAE J231 (FOPS) standards.

ENGINE

  • Case/FPT 6.7 L turbocharged, diesel, Tier 3 Certification.
  • Electronic fuel injection.
  • Dry air filter with primary and secondary safety elements.
  • Air pre-filter with Cyclone dust ejector.
  • 90 A alternator.
  • 5.4 hp (4.0 kW) starting motor.
  • Tilting hood.

HYDRAULIC SYSTEM

  • Hydraulic system with load sensor, centrally closed.
  • 9-section control valve.
  • Hydraulic control for all functions: blade lifting (right- and left-hand side), turning circle, circle sideways displacement, wheel inclination, chassis articulation, blade sideways and angle displacement, frontal and rear accessories.
  • Diagnosis central with 8 quick couplers.
  • Movable saddle with 5 service positions and hydraulic lock.
  • 4,267 x 671 x 22 mm – (14’) blade.
  • Axial piston hydraulic pump.
  • Hydraulic motor-drive fan.

BRAKES

  • Multi-disk oil-bathed service brakes applied on four rear wheels, with two parallel circuits: one for right tandem wheels and another for left tandem wheels. With nitrogen accumulator safety system.
  • Dry disc parking brakes, applied by spring and hydraulic release.

TIRES

  • 14” rim 3-piece / 17.5 x 25 – 12PR – L2 tubeless.

AXLES

  • Conventional differential with brake on the four wheels and electrically-hydraulically actuated differential lock (rear axle).

STEERING

  • Hydraulic steering with built-in emergency system.

REAR IMPLEMENT

  • Ripper with 3 large teeth and 5 small teeth.

FRONT IMPLEMENT

  • Front counterweight – 492 kg

INSTRUMENTS

  • Electronic Information Central.
  • Indicators/gauges: speedometer, tachometer, F/N/R selected steering, transmission modes - automatic/manual, selected speed, engine coolant temperature, fuel level, transmission oil temperature, hydraulic oil temperature, hour meter.
  • Fuel consumption.
  • Engine diagnosis.
  • Engaged DeClutch indication.
  • Transmission diagnosis.
  • Indicating lights: low fuel level, direction lights, high beam, brake pressure, main alert, parking brake.
  • Sound alerts: warning alert, emergency alert, and reverse alert.

ELECTRIC SYSTEM

  • Lights: front headlight with direction arrow (2), tail brake light and direction arrow (2), rear service headlight on top of the cab (2), front service headlight on top of the cab (2).
  • 24 V system (2 12 V / 1010 CCA batteries).
  • Electronic system monitoring.
  • Horn.
  • Hour meter.
  • Back up alarm

TRANSMISSION

  • ZF torque converter type transmission with Lock-up (also working as Direct Drive), Powershift, 6 speeds forward and 3 reverse, automatic speed shift, and emergency device in case of electric power failure (Limp-Home).

OTHERS

  • Standard tool set.
  • Towing bar / Standard circle.

Optionals

Open Close

CAB (ROPS/FOPS)

  • Open cab
  • Closed high cab (front flip-down window)
  • Closed low cab (fixed front window)
  • Closed low cab (front flip-down window)

FRONT IMPLEMENT

  • Front blade – 1,165 kg.
  • Light thrust plate – 492 kg.
  • Heavy thrust plate – 800 kg.
  • Front ripper with 5 teeth
  • 6 additional teeth for front ripper
  • Dozer blade float electrovalve

BLADE

  • 3,658 x 622 x 22 mm (12’) blade.
  • 3,962 x 671 x 22 mm (13’) blade.
  • Right-hand blade extension – 610 mm.
  • Left-hand blade extension – 610 mm.
  • Heavy Duty blade edge – additional.

REAR IMPLEMENT

  • Additional ripper teeth (2 large and 4 small ones).
  • Rear towing hook.
  • Machine hoisting support.

SERVICE HEADLIGHTS

  • 2 work lights behind the blade
  • 2 service lights in front of the moldboard
  • 2 rear implement work lights

LOCKOUT/FLOATING/ANTISHOCK – CENTRAL BLADE AND CIRCLE

  • Moldboard lifting cylinder lock valve
  • Moldboard float electrovalve (incorporates lock valve)
  • Anti-shock electrovalve with 2 accumulators for moldboard
  • Anti-shock electrovalve with 3 accumulators for moldboard and circle

ASSEMBLED TIRES AND RIMS

- Tubeless tires

9” rim – one-piece / 14x24 tyre – 12PR – G2

10” rim – 3-piece / 14x24 tyre – 12PR – G2

13” rim – one-piece / 17.5x25 tyre – 12PR – L2

14” rim – 3-piece / 17.5x25 tyre – 16PR – L3

17” rim – 3-piece / 20.5x25 tyre – 12PR – L3

17” rim – 3-piece / 20.5x25 tyre – 16PR – L3

- Tube tires

9” rim – one-piece / 14x24 tyre – 12PR – G2

10” rim – 3-piece / 14x24 tyre – 12PR – G2

- Tubeless radial tires

9” rim – single-piece / 14x24 tyre – L2 – RADIAL XGLA2

10” rim – 3-piece / 14x24 tyre – L2 – RADIAL XGLA2

RIMS

  • 9” rim – single-piece with valve.
  • 13” rim - single-piece with valve.
  • 10” rim - 3-piece with valve.
  • 14” rim - 3-piece with valve.
  • 17” rim – 3-piece with valve.

SEAT/SAFETY BELT

  • Mechanic suspension vinyl seat.
  • Pneumatic suspension cloth seat.
  • Safety belt – 76.5 mm (3”).

OTHERS

  • Heater and fan for closed cab.
  • Acoustic insulation for closed cab.
  • Fire extinguisher.
  • Glass washer and lower front wipers.
  • Rear glass washer and wipers.
  • Radio.
  • Tandem locking device.
  • Sunshade (front and rear).
  • Rear window demister.
  • Rotary beacon.
  • Deluxe tool box.
  • Box without tools with support, attached to the front chassis.
  • Slow movement symbol.
  • Electric tire inflating pump.
  • Spare tire support.

FIND A DEALER

CASE dealers provide world-class equipment and aftermarket support, industry-leading warranties and flexible financing.

To start your search, please enter the following information:

Search now

What can we help you find?

0 result (s) found
Type
Filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favorites

0 result (s) found