Page added to favorites

Equipment

Motor Grader

885B SERIES 2

More efficiency

High efficiency, high torque, and low consumption engine. Everything for favoring a better performance. These are some of the features of the 885B Series 2 Motor Grader, which features two power curves (220/234 hp). Considered as a reference due to its design, comfort, and ergonomics, this motor grader also provides an effortless cut, due to its central blade with Roll-Away profile.

A great fit for:
  • Agriculture
    Agriculture
  • Government / Municipalities
    Government / Municipalities
  • Non-Residential Construction
    Non-Residential Construction
  • Rental
    Rental
  • Residential Construction
    Residential Construction
  • Roads & Bridges
    Roads & Bridges
  • Snow Removal
    Snow Removal
  • Waste/Scrap
    Waste/Scrap
  • Mining
    Mining
Downloads
SPEC - 885B SERIES 2
SPEC - 885B SERIES 2
File size 252.38 KB
CASE Product Line
CASE Product Line
File size 12.9 Mb
BROCHURE MOTOR GRADERS 845B/865B/885B SERIES 2
BROCHURE MOTOR GRADERS 845B/865B/885B SERIES 2
File size 3.97 Mb

Hotspots

FO-Motoniveladoras-Hotspot
F-Motoniveladoras-Hotspot-1

ROPS/FOPS cab, with rounded design and greater glazed area, allowing for more visibility on all directions.

F-Motoniveladoras-Hotspot-2

Central blade with, involute, curved profile, which allows effortless cutting.

F-Motoniveladoras-Hotspot-3

With the towing bar and the chassis circle, you have much more stability, and the maximum blade turning yield.

FEATURES

Resources

Open Close

CAB

  • Greater vision area.
  • Comfort and ergonomics at the inside environment.

INVOLUTE BLADE

  • Easy material rolling, thus increasing the earth moved volume.
  • Less stress on the blade, and more fuel savings.

LOAD SENSING TYPE HYDRAULIC SYSTEM

  • The hydraulic pump works in standby, consuming the minimum possible engine power, and when the application demands more flow, it is piloted for supplying the hydraulic system with the required flow, either higher or lower, depending on the operation.

TRANSMISSION

  • 6 speeds.
  • It is coupled to the engine via a torque converter.
  • The converter features a locking system (Lock-up), which transforms it in a rigid coupling, starting to work as a Direct Drive system.
  • The operator can use either the automatic or manual modes.

SELF-ADJUSTING BRAKES

  • Oil bath, multidisc, self-adjusting brakes with two circuits, one for each side of the rear axle.

MAINTENANCE

  • Quick and at low cost.
  • Tilting hood, which improves access to engine components and to daily maintenance points.
  • Lubricating points accessible from ground level.

TOWING BAR AND CHASSIS CIRCLE

  • They provide stability, power, and maximum blade turning yield.

CONTROL LEVERS

  • Within operator’s reach and easy to operate.

RIPPER

  • Rear ripper with three large teeth, in addition to five small teeth and/or five large teeth plus nine small teeth.

SCARIFIER

  • Front scarifier can have up to 11 teeth.

PLASTIC FUEL TANK

  • At ground level, with lock on the lid.

Specifications

Open Close
 
Engine brand FPT
Certification Tier-3
Cylinders 6
Bore and stroke 104 x 132 mm (4,09” x 5,2”)
Cylinder volume 6700 cm³ (408,86 in³)
Gross power (SAE J1995) 220/234 hp (164/175 kW) at 2.200 rpm
Net power (SAE J1349) 205/219 hp (153/163 kW) at 2.200 rpm
Hydraulic pump nominal flow 186 l/min (49 gpm) at 2.200 rpm
Transmission ZF
Blade shift (Right / Left) 686 mm (2' 3") / 533 mm (1' 9")
Operating Weight 18.120 kg
Weight, front axle 4.913 kg
Weight, rear axle 13.207 kg
Moldboard width 4.267 mm (14’)
Circle Rotation 360º
Articulation range 25º left/right
Maximum speed (Forward / Reverse) 38,8 / 27,2 km/h (24,1 / 17,0 mph)

Standard Equipment

Open Close

OPERADOR CAB

  • ROPS/FOPS high closed cab (fixed front window) with:
    • Air conditioning (*)
    • Adjustable cloth mechanical suspension seat with 2” (50.8 mm) seat belt
    • Adjustable operator console
    • Pedal accelerator
    • Manual accelerator
    • Front upper windshield wiper with washer
    • Safety glass
    • Dome light
    • Internal and external rearview mirrors 12 V socket (*)
    • Automatic master switch
    • Steps on the right-hand and left-hand sides (*) Only available in closed cabs

All ROPS/FOPS cabs are certified according to standards SAE J1040 (ROPS) and SAE J231 (FOPS).

ENGINE

  • FPT 6.7 L turbocharged, diesel,
    • Tier 3 certified
  • Electronic fuel injection
  • Dry air filter with primary and secondary safety elements
  • Air pre-filter with cyclonic dust ejector
  • 90 A alternator
  • 10,5 hp (7,8 kW) starter motor
  • Swing-up hood with eletric opening and closing

HYDRAULIC SYSTEM

  • Closed centre, load-sensing hydraulic system
  • 9-section control valve
  • Hydraulic control for all functions: blade lifting (right and left side), circle turn, circle side shift, wheel lean, chassis articulation, blade side shift and pitch, front and rear accessories
  • Diagnostics centre with 8 quick couplers Movable saddle with 5 service positions and electro-hydraulic lock
  • Blade (4,267 x 671 x 22 mm) – (14’)
  • Hydraulic axial piston pump
  • Hydraulic motor fan

Brakes

Multi-disk oil-bathed service brakes applied on four rear wheels, with two parallel circuits: one for right tandem wheels and another for left tandem wheels. With nitrogen accumulator safety system. Dry disc parking brakes, applied by spring and hydraulic release.

TYRES

14” 3-piece rim / 17.25 x 25 – 12PR – G2 tubeless

OTHERS

Standard tool set Drawbar/Standard circle

AXLES

Axles - Conventional differential with four-wheel braking and differential lock with electro-hydraulic power drive (rear axle)

STEERING

Hydraulic steering with built-in emergency system

INSTRUMENTS

Electronic Information Centre Indicators/gauges: Speedometer Tachometer F/N/R direction selected Transmission modes – automatic/manual Selected Gear Engine coolant temperature Fuel level Transmission oil temperature Hydraulic oil temperature Hourmeter Fuel consumption Engine diagnostics DeClutch activation indicator Transmission diagnostics

Indicator lights

  • Low fuel level
  • Flood lights
  • High Beam
  • Brake pressure
  • Main alert
  • Parking brake

AUDIBLE ALERTS

  • Caution alert
  • Emergency alert
  • Reverse alert

ELECTRICAL SYSTEM

  • Lights:
    • Front headlight with turn signal (2)
    • Brake light and rear turn signal (2)
    • Cab mounted rear flood light (2)
    • Cab mounted front flood light (2)
  • 24 V system (2 x 12 V / 1010 CCA batteries)
  • Electrical system monitoring
  • Horn
  • Hour Meter
  • Back up alarm

TRANSMISSION

  • ZF Transmission, torque converter type with lock up (also functions as Direct Drive), Powershift, 6 forward and 3 reverse speeds, automatic gear shifting, emergency device in case of electrical failure (Limp-Home)

REAR IMPLEMENT

  • Ripper with 3 large teeth and 5 small teeth 1,874 lb (850 kg)

FRONT IMPLEMENT

  • Front counterweight 1,085 lb (492 kg)
  • Heavy push plate 1764 lb (800 kg)

Conformities ISO Standards SAE

  • Cab ROPS SAE J1040
  • Cab FOPS SAE J231
  • Power
    • Gross SAE J1995
    • Net SAE J1349
  • Torque
    • Gross SAE J1995
    • Net SAE J1349
  • Brakes SAE J150/ISO-3450
  • Parking Brake ISO-3450
  • Steering SAE J53 / J1511
  • Additional steering SAE 1011 / ISO-5010
  • Turning radius ISO-7457
  • Hydraulic motor turning radius SAE J499
  • Engine
    • External noise SAE 1372 / ISO-6393
  • Cab
    • Internal noise SAE J919

Optionals

Open Close

CAB (ROPS/FOPS)

  • Open cab
  • Closed high cab (front flip-down window)
  • Closed low cab (fixed front window)
  • Closed low cab (front flip-down window)

OTHER

  • Heater and fan for closed cab
  • Acoustic insulation for closed cab
  • Fire extinguisher
  • Windshield washer and lower windshield wipers
  • Rear windshield washer and wipers
  • Radio
  • Tandem locking device
  • Sun visor (front and rear)
  • Rear defroster

FRONT IMPLEMENT

  • Dozer blade 2568 lb (1165 kg)
  • Light push plate 1085 lb (492 kg)
  • Heavy push plate 1764 lb (800 kg)
  • Front Ripper with 5 teeth 6 additional teeth for front ripper 1521 lb (690kg)
  • Dozer blade float electrovalve

REAR IMPLEMENT

  • Additional teeth for ripper: 2 large and 4 small
  • Rear pull hook
  • Machine lifting cradle

BLADE

  • Blade 12’ (3,658 x 622 x 22 mm)
  • Blade 13’ (3,962 x 671 x 22 mm)
  • Right blade extension 2” (610 mm)
  • Left blade extension 2” (610 mm)
  • Heavy Duty cutting edge Additional

WORK LIGHTS

  • 2 work lights behind the blade
  • 2 service lights in front of the moldboard
  • 2 rear implement work lights

LOCK/FLOATING/ANTI-SHOCK –
MOLDBOARD AND CIRCLE

  • Moldboard lifting cylinder lock valve
  • Moldboard float electrovalve (incorporates lock valve)
  • Anti-shock electrovalve with 2 accumulators for moldboard
  • Anti-shock electrovalve with 3 accumulators for moldboard and circle

SEAT/SAFETY BELT

  • Vinyl seat with mechanical suspension
  • Cloth seat with air suspension
  • Seat belt 3” (76,5 mm)

OTHER OPTIONAL ITEMS

  • Beacon light
  • Luxury tool box
  • Toolbox without tools with support, fixed on front chassis
  • Slow moving vehicle sign
  • Electric pump to inflate tyres
  • Spare tyre cradle

RIMS

  • 9” rim – single-piece with valve
  • 13” rim – single-piece with valve
  • 10” rim – 3-piece with valve
  • 14” rim – 3-piece with valve

TIRES AND RIMS MOUNTED

  • Tubeless tyres 9” rim – one-piece / 14x24 tyre – 12PR – G2 10” rim – 3-piece / 14x24 tyre – 12PR – G2 13” rim – one-piece / 17.5x25 tyre – 12PR – L2 14” rim – 3-piece / 17.5x25 tyre – 16PR – L3
  • Tube tyres 9” rim – one-piece / 14x24 tyre – 12PR – G2 10” rim – 3-piece / 14x24 tyre – 12PR – G2
  • Tubeless radial tyres 9” rim – single-piece / 14x24 tyre – L2 – RADIAL XGLA2 10” rim – 3-piece / 14x24 tyre – L2 – RADIAL XGLA2

FIND A DEALER

CASE dealers provide world-class equipment and aftermarket support, industry-leading warranties and flexible financing.

To start your search, please enter the following information:

Search now

What can we help you find?

0 result (s) found
Type
Filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favorites

0 result (s) found