new favorite added

Products

Crawler Dozers

2050M

  • Power 173 kW / 232 hp
  • Blade Capacity 3.54 m³ Straight, 5.58 m³ Semi-U, 4.82 m³ Straight PAT

2050M

The perfect equipment for:
  • Infrastructure
    Infrastructure
  • Recycling
    Recycling
  • Quarrying
    Quarrying
Downloadables:
Crawler Dozers
Crawler Dozers
File size 2.69 Mb

Specifications

ENGINE
Model FPT F4FA613N*E002 Tier 2
Cylinders 6
Displacement 6.7 l
Fuel injection Direct common rail
Fuel filter Spin-on w/ in-line strainer
Air intake Cross-flow
Cooling Liquid
Engine speeds RPM
High idle – no load 2200 +/- 50
Rated – full load 2000
Low idle 800 +/- 25
Horsepower SAE J1349
Engine rated net power 214 hp - 160 kW @ 2200 rpm
Engine max net power 232 hp - 173 kW @2200 rpm
Rated net torque 1004 Nm
Max net torque 1082 Nm
Engine lubrication
Pump Deep sump plate cooler w/ pressurized under-piston nozzles
Pump operating angle ratings
Side-to-side 35°
Fore and aft 45°
Radiator
Core size area (Water Radiator) 0.33 m²
Rows of tubes 4
Fan
Diameter 700 mm
Ratio hydraulically driven
POWERTRAIN
Dual path hydrostatic
Pump Variable axial piston
Motor Variable bent axis piston
Max. drawbar pull* 372 kN
Transmission Single lever control electronic straight tracking
Oil filter 2 micron, spin-on, replaceable
Travel speeds*
Forward 0 – 9.3 km/h
Reverse 0 – 9.3 km/h
Parking brakes Heavy-duty, spring-applied, hydraulic pressure release
Steering brakes Hydrostatic
Final drive 2 helical gear reduction to planetary output
Ratio 48.75 :1
TRANSMISSION COOLING
Type Oil to air
Core size 0.31m²
ELECTRICAL SYSTEM
Alternator 120 amps
Batteries (2) 12-volt, low-maintenance 1200 cold-cranking amps @ -18°C
OPERATOR ENVIRONMENT
Operator Environment ROPS/FOPS cab; Pneumatically suspended seat; w/ back adjustment; Seat belt; Adjustable armrests; Foot rests;
Tool storage area; Headliner; Floor mat; Tilting seat platform; Noise Level 75 dbA
Warning lights Air filter; Alternator; Diagnostic fault indicator; Engine coolant temperature; Engine oil pressure;
Hydraulic filter; Low fuel level; Park brake engaged; Service soon indicator; Transmission filter;
Transmission charge pressure
Gauges Battery voltage; Digital hourmeter/tachometer diagnostic/service reminder; Fuel level;
Transmission oil temperature; Transmission speed indicator; Water temperature
Audible warnings Engine coolant temperature; Engine oil pressure; Low fuel level, Transmission charge pressure;
Transmission/hydraulic temperature
TRACK ON GROUND
Shoe area
610 mm 32269 cm² LT, 39979 cm² XLT
711 mm 46599 cm² WT
762 mm 49941 cm² WT
914 mm 59904 cm² LGP
HYDRAULICS
Pump flow @ 2200 RPM 160 l/min
Max pressure 248 bar
Lift Cylinder PAT nr. 2
Bore diameter 114.3 mm
Rod diameter 63.5 mm
Stroke 428 mm
Angle cylinder PAT nr. 2
Bore diameter 114 mm
Rod diameter 63.5 mm
Stroke   502.7 mm
Tilt cylinder PAT nr. 1
Bore diameter 127 mm
Rod diameter 63.5 mm
Stroke 148.3 mm
Lift cyclinder Bull Dozer
Bore diameter 82.6 mm
Rod diameter 50.8 mm
Stroke 1000 mm
Tilt cylinder Bull Dozer
Bore diameter 114.3 mm
Rod diameter 36.5 mm
Stroke 126 mm
SERVICE CAPACITY
Fuel tank 405 l
Engine oil w/ filter 16.4 l
Engine oil w/o filter 15.6 l
Engine cooling system 30.2 l
Hydraulic reservoir 210 l
Final drive - per side 25 l
Track rollers - each 0.275 l
Front idlers - each 0.225 l
Carrier rollers - each 0.334 l
UNDERCARRIAGE
Track adjustment Hydraulic
Frame Oscillating equalizer beam suspension and pivot shaft
Track link pitch 175 mm
CLT track 203 mm
CELT track 203 mm
Track shoe height 71.5 mm
Pin diameter 44 mm
Bushing diameter
CLT track 72 mm
CELT track 93 mm
Track shoes per side
CLT/CELT track 40 LT, 45 XLT /WT/LGP
Track rollers per side
LT 7
XLT/WT-LGP 8
Carrier rollers per side 2
Track roller rail diameter 187.5 mm
BLADE
Variable blade pitch - adjustable 55° +/- 5°
Lift speed - per second 483 mm
Cutting edge Reversible, replaceable
Width 200 mm
Thickness 20 mm
RIPPER
Max. penetration 570 mm
Width 1953 mm
Cut width 1889 mm
Max. ground clearance 592 mm
Max. number of shanks 3
Tooth spacing w/3 teeth 944 mm
Hydraulic cylinder Double-acting
Diameter 155 mm
Stroke 596 mm
Rod 69 mm


* Measured using standard track chain. Increase travel speeds by 4% and reduce drawbar pull by 4% w/ the optional CELT track chain

FIND A DEALER

Your search for world-class equipment, industry-leading aftermarket support and flexible financing starts here.

To start your search, please enter the following information:

Search now

type to search what are you looking for:

0 result found
type
filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favourites

0 result found