ENGINE
Model
FPT Industrial Engine F4HE9684K
Cylinders
6
Displacement
6.7 L
Fuel injection
Direct common rail
Fuel filter
Screw-on, with screen
Cooling
Liquid
Engine speeds
RPM
High idle - no load
2200 +/- 50
Rated - full load
2200
Low idle
800+/- 25
Horsepower @2200 rpm SAEJ1349
Net
88 kW
Imperial
118 hp
Metric
120 hp
Gross
97 kW
Imperial
130 hp
Metric
132 hp
Max torque
589 Nm @ 1400rpm
Engine lubrication
“Forced lubrication” with oil jet piston refrigeration system
Pump operating angle ratings
Side-to-side
45°
Fore and aft
45°
Radiator
Core size area
0.61 m2
Rows of tubes
4
Fan
Diameter
660 mm
Propeller
Belt mechanical drive
TRANSMISSION COOLING
Type
Heat exchange
Core size
0.54 m2
ELECTRICAL SYSTEM
Alternator
65 amps
Battery
2X12 V in series, maintenance free, 750 A CCA at -18°
POWERTRAIN
Dual path hydrostatic
Pump
Variable axial piston
Motor
Variable bent axis piston
Max. drawbar pull
214 kN
Transmission
Single lever control electronic tracking
Oil filter
4 micron, spin-on, replaceable
Travel speeds
Forward
0-9.7 km/h
Reverse
0-9.7 km/h
SAHR parking brake (Spring applied hydraulically released)
Steering brakes
Hydrostatic
Oil Final drive
2 helical gear reductions to planetary reduction
Reduction ratio
61.4:1
HYDRAULICS
Pump Flow@2200 RPM
132 L/min
Max Pressure
207 bar
Lift cylinder PAT
nr.2
Bore diameter
108 mm
Rod diameter
50.8 mm
Stroke
445 mm
Angle cylinder PAT
nr.2
Bore diameter
127 mm
Rod diameter
63.5 mm
Stroke
381 mm
Tilt cylinder PAT
nr.1
Bore diameter
127 mm
Rod diameter
63.5 mm
Stroke
120 mm
OPERATOR ENVIRONMENT
Cab ROPS/FOPS with air-conditioning
Single joystick fro speed and direction
Adjustable seat upholstered with cloth and air suspension
50.8mm (2”)
Retractable seatbelt
Adjustable arm rests
Two foot rests
Rear view mirror
Three windshield wipers
A dome light
12 V coonector for accessories
Padded roof
Floor mats
Warning lights
Air filter
Alternators
Failure diagnosis indicator
Engine cooling fluid temperature
Engine oil pressure
Hydraulic filter
Low fuel
Emergency brake on
Maintenance service indicator
Transmission filter
Transmission load pressure
Indicators
Battery voltage
Fuel level
Digital hour meter/tachometer/diagnosis/service reminder
Transmission oil temperature-transmission
Speed indicator
Cooling fluid temperature
Audible alarms
Engine cooling fluid temperature
Engine oil pressure
Low fuel
Hydraulic/hydrostatic system oil temperature
OPERATING WEIGHT
Unit equipped with a cab, full fuel tank, 77 kg operator, frontal pull hook, track guides, PAT blade
Extra Long Tracks (XLT)
13625 Kg
ADD-ON WEIGHTS
-
-
Drawbar
66 Kg
Ripper
1043 Kg
Roller potection
134 Kg
BLADE
Variable blade pitch - adjustable
55° to 60°
Lift speed - per second
483 mm
Cutting edge
Reversible, replaceble
Width
200 mm
Length
2158 mm
Thickness
19.1 mm
UNDERCARRIAGE
Track adjustment
Grease injection
Hydraulic frame
Two-tier chassis, manufactured in structural steel
Track link pitch
175.4 mm
Track shoe height
51 mm
Pin diameter
36.6 mm
Bushing diameter
62 mm
Track shoes per side
43
Track rollers per side
7
Carrier rollers per side
2
Track roller rail diameter
190 mm
TRACK ON GROUND
Shoe width
508 mm
Tracks on ground
26323 cm2
RIPPER
Max. penetration
478 mm
Width
1712 mm
Cut width
1636 mm
Max. ground clearance
424 mm
Max. number of shanks
3
Tooth spacing w/3 teeth
785 mm
Hydraulic cylinder
Double-acting
Diameter
102 mm
Stroke
254 mm
Rod
51 mm
SERVICE CAPACITY
Fuel tank
300 L
Engine oil w/filter
16.4 L
Engine oil w/o filter
15.6 L
Engine cooling system
25.5 L
Hydraulic reservoir
98.4 L
Final drive - per side
14.2 L
Track rollers - each
0.330 L
Front idlers - each
0.460 L
Carrier rollers - each
0.275 L