586H
Pallets to pipes, the CASE 586H rough terrain forklift gets it done smoother, easier and faster. With intuitive controls like a push-button parking brake, eye-level AIC (Advanced Instrument Cluster), optional deluxe suspension seat and spacious operating platform – the 586H offers maximum comfort and ease of use. If low clearances are an issue, CASE offers freelift masts that allow you to raise the forks five feet off the ground prior to the mast protruding, keeping your overall travel height lower.
DOWNLOADS
Download Brochures
Share or download a brochure for additional information.
Engine
FPT F5HFL463D
Displacement/Cylinders–in³ (L)
207 (3.4)/4
Explore the Features
SPECIFICATIONS
Standard Equipment
- FPT 3.4 L Diesel
- Cooled EGR
- Diesel Oxidation Catalyst
- Full flow engine oil filter
- Air cleaner: Replaceable dry type with radial seal
- Radiator with de-aeration bottle
- Antifreeze to -34°F (-37°C)
- Foot throttle
- Self adjusting belt
- 15 ft Std. Mast 1,863 lb (845 kg)
- 22 ft Std. Mast 2,608 lb (1 183 kg)
- 16 ft Freelift Mast 2,188 lb (993 kg
- Gear pump – 18 gal/min @ 3,000 psi (68 L/min @ 207 bar)
- Heavy-duty hydraulic oil cooler
- 7 micron, spin-on oil filter
- ROPS/FOPS certified protective canopy
- 2 halogen headlights
- 2 rear halogen work lights
- Wide walk through platform
- Vinyl seat
- 2 in (51 mm) seat belt
- Molded front fenders
- Gauges: Hour meter, Engine RPM, Engine coolant temperature, Transmission oil temperature, Job timer, Fuel level
- Warning lights: Air cleaner restriction, Alternator, Cold start, Engine oil pressure, Hydraulic oil filter bypass, Parking brake engagement, Engine coolant temp, Battery voltage
- Audible alarms: Coolant temperature, Engine oil pressure, Parking brake engagement, Converter oil temperature, Backup, Horn
- Front axle, as selected: 2/4WD heavy-duty outboard planetary drive, with 19.5 L x 24 tires
- Rear axle: 2WD heavy-duty front axle with 11 L x 16 tires, 4WD heavy-duty mechanically driven rear axle, with 12 L x 16.5 tires
- 4F-4R Power Shuttle Synchromesh Transmission
- Torque converter
- On-the-Go electric 4WD control
- Electric F/R shuttle control
- Electric differential lock control, with push-button activation
- Park brake, spring applied, hydraulic release
- Swing out side panel engine access
- Front/rear tie downs
- Reflective logos
- Canopy only: 2 front driving lights, 2 rear halogen work lights
SPECIFICATIONS
Optional Equipment
- Cold Weather Starting Aid: Dual 12 Volt batteries with glow plugs
- Block heater
- Master disconnect switch and remote jump start terminals
- Pre-Cleaner
- 15 ft Standard Mast
- 22 ft Standard Mast
- 16 ft Freelift Mast
- Power Positioning Mast and Forks
- 48 in Pallet Forks, ITA Class 3 hook type
- 48 in Pallet Forks, shaft type
- 60 in Backrest
- Front auxiliary hydraulics
- Load control
- Deluxe suspension seat, with lumbar support and high adjustments
- Slow moving vehicle emblem
- Special paint
- Lock-up covers
- Light Package: Turn signals, Hazard warning, Combination flashers
- Tool box
- Sitewatch Telematics
SPECIFICATIONS
Compare Specifications
SPECIFICATIONS | |
Engine | |
Displacement/Cylinders–in³ (L) | |
Emissions Certification Solutions* | |
Gross Horsepower @ 2200 RPM – hp (kW) | |
Net Horsepower @ 2200 RPM – hp (kW) | |
Peak Torque – lb·ft (N·m) | |
Transmission Type | |
Maximum Travel Speed Forward – mph (kph) | |
Lift Capacity at 15 ft. @ 24 in Center– lb (kg) | |
Lift Capacity at 22 ft. @ 24 in Center– lb (kg) | |
Operating Weight – lb (kg) | |