new favorite added


Forklifts New Zealand


  • Lift Capacity 2 722 kg
  • Engine Power 74 hp/ 55 kW


Pallets to pipes, the CASE 586H rough terrain forklift gets it done smoother, easier and faster. With intuitive controls like a push-button parking brake, eye-level AIC (Advanced Instrument Cluster), optional deluxe suspension seat and spacious operating platform – the 586H offers maximum comfort and ease of use. If low clearances are an issue, CASE offers freelift masts that allow you to raise the forks five feet off the ground prior to the mast protruding, keeping your overall travel height lower.

586H - Specsheet
586H - Specsheet
File size 754.18 KB
File size 7.26 Mb



The CASE 586H and 588H increase productivity and efficiency with industry-leading lift speed and dependable, high-performing lift capacities. These rough terrain forklifts are able to operate in a variety of terrains with the optional 4 four-wheel drive and standard differential lock. No need to worry about your load, CASE offers maximum travel capabilities with their 60° of mast tilt and optional load control. If operating in tight areas is a concern, the 588H features a narrow zero-tail swing design, meaning if the rear tires clear it, the rear of the machine will as well. CASE rough terrain forklifts feature an industry standard ITA class 3 carriage and forks allowing a wide range of aftermarket attachments.

Fuel Efficiency

These forklifts feature a simple, cost-effective Tier 4 Final solution. The 74 horsepower, 3.4 liter FPT engine uses a Diesel Oxidation Catalyst (DOC) to deliver a minimum of 5% better fuel efficiency than our previous models and faster response times while meeting current environmental standards.

Comfort and Visibility

Without a disruptive third mast, our wide-channel, dual-mast design gives the H Series unmatched visibility. A narrow operating console further help increase front view so operators can confidently secure materials and a low-profile hood provides a clear view behind the machine. The large operating platform provides ample room for any operator. Add the optional deluxe suspension and load control for a comfortable ride on any terrain.


From tool-free swing-out access doors and spin-on filters, to ground-level site gauges and grouped service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine. Axles are also easily serviced without complete disassembly for easy upkeep.


Standard Equipment

Open Close


  • FPT 3.4 L Diesel
  • Cooled EGR
  • Diesel Oxidation Catalyst
  • Full flow engine oil filter
  • Air cleaner: Replaceable dry type with radial seal
  • Radiator with de-aeration bottle
  • Antifreeze to -34°F (-37°C)
  • Foot throttle
  • Self adjusting belt


  • 15 ft Std. Mast 1,863 lb (845 kg)
  • 22 ft Std. Mast 2,608 lb (1 183 kg)
  • 16 ft Freelift Mast 2,188 lb (993 kg


  • Gear pump – 18 gal/min @ 3,000 psi (68 L/min @ 207 bar)
  • Heavy-duty hydraulic oil cooler
  • 7 micron, spin-on oil filter


  • ROPS/FOPS certified protective canopy
  • 2 halogen headlights
  • 2 rear halogen work lights
  • Wide walk through platform
  • Vinyl seat
  • 2 in (51 mm) seat belt
  • Molded front fenders
  • Gauges: Hour meter, Engine RPM, Engine coolant temperature, Transmission oil temperature, Job timer, Fuel level
  • Warning lights: Air cleaner restriction, Alternator, Cold start, Engine oil pressure, Hydraulic oil filter bypass, Parking brake engagement, Engine coolant temp, Battery voltage
  • Audible alarms: Coolant temperature, Engine oil pressure, Parking brake engagement, Converter oil temperature, Backup, Horn


  • Front axle, as selected: 2/4WD heavy-duty outboard planetary drive, with 19.5 L x 24 tires
  • Rear axle: 2WD heavy-duty front axle with 11 L x 16 tires, 4WD heavy-duty mechanically driven rear axle, with 12 L x 16.5 tires
  • 4F-4R Power Shuttle Synchromesh Transmission
  • Torque converter
  • On-the-Go electric 4WD control
  • Electric F/R shuttle control
  • Electric differential lock control, with push-button activation
  • Park brake, spring applied, hydraulic release


  • Swing out side panel engine access
  • Front/rear tie downs
  • Reflective logos
  • Canopy only: 2 front driving lights, 2 rear halogen work lights

Optional Equipment

Open Close


  • Cold Weather Starting Aid: Dual 12 Volt batteries with glow plugs
  • Block heater
  • Master disconnect switch and remote jump start terminals
  • Pre-Cleaner


  • 15 ft Standard Mast
  • 22 ft Standard Mast
  • 16 ft Freelift Mast
  • Power Positioning Mast and Forks
  • 48 in Pallet Forks, ITA Class 3 hook type
  • 48 in Pallet Forks, shaft type
  • 60 in Backrest


  • Front auxiliary hydraulics


  • Load control
  • Deluxe suspension seat, with lumbar support and high adjustments


  • Slow moving vehicle emblem
  • Special paint
  • Lock-up covers
  • Light Package: Turn signals, Hazard warning, Combination flashers
  • Tool box
  • Sitewatch Telematics


Open Close

Base & Extended Warranty Coverage

  • 1-Year/Unlimited-Hour Full-Coverage Base Limited Warranty
  • 2-Year /2,000-Hour Extended Engine Warranty

Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.

Drive Train Warranty - Drive (flex) plates / flywheel, drive axle assembly, drive couplings, drive shafts / universal joints, final drive / planetary, hydraulic drive motor, hydraulic drive pump, hydraulic pump when used as a power source for drive pump or drive motor, propulsion planetary drive, pump drive coupling, pump drive gearbox, seals in idlers and rollers, swing reducer transmission, torque converter, track steering brakes and clutch, transfer gear group, transmission charge pump, transmission / transmission control valve, transmission electronic controller, trencher drive gearbox, turntable bearing / swing gear / hydraulic swivel, and wet brakes / wet clutch.

Purchased Protection

Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs. Plans are available up to six-years / 7,500 hours on CASE Forklift models.

Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.


The CASE dealers are the ones that know everything about CASE products.

To start your search, please enter the following information:

Search now

Contact us!

type to search what are you looking for:

0 result found
filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favourites

0 result found