dodano do ulubionych

Ładowarki

Ładowarki Kołowe Serii F

821F

821F

Idealny sprzęt dla:
  • Infrastruktura
    Infrastruktura
  • RECYKLING/ODPADY
    RECYKLING/ODPADY
  • WYDOBYCIE/KOPALNIE
    WYDOBYCIE/KOPALNIE
MATERIAŁY DO POBRANIA
Ładowarki kołowe - 721F/821F/921F
Ładowarki kołowe - 721F/821F/921F
Rozmiar pliku 5,02 Mb
Pobierz

SPECYFIKACJA

ENGINE
FPT engine NEF N67
Cylinders 6
Displacement (l) 6.7
Air intake Turbocharger with air-to-air cooling.No EGR valve is used:
Only fresh air is taken for combustion and no extra cooling system is needed
Injection Common Rail Multiple Injection
After Treatment System HI-eSCR (DOC + SCR)
Emission level Compliant with EU Stage IV and US Tier IV Final
Max. power (kW) 172
Max. power (hp) 230
(@rpm) 1800 (SAE J1995/ISO 14396)
Max. torque (N.m) 1184
(@rpm) 1300 (SAE J1349)
TRANSMISSION
Proshift 5-speed powershift with lock up Lock-up clutch eliminates torque
converter losses from second gear up to fith gear
Power inch Proportional decluching depending on braking intensity
Forward 1 (km/h) 6.6
Forward 2 (km/h) 11
Forward 3 (km/h) 17
Forward 4 (km/h) 36
Forward 5 (km/h) 40
Reverse 1 (km/h) 7
Reverse 2 (km/h) 12
Reverse 3 (km/h) 28
4-Speed powershift Intelligent Clutch Cut Off (ICCO)
Forward 1 (km/h) 7
Forward 2 (km/h) 12
Forward 3 (km/h) 23
Forward 4 (km/h) 37
Reverse 1 (km/h) 7
Reverse 2 (km/h) 13
Reverse 3 (km/h) 25
AXLES AND DIFFERENTIAL
Rear axle total oscillation 24°
A-Choice Heavy duty axles with open differentials and automatic.
100% lock system on the front differential.
100% tractive effort on soft ground, no wheel slip, less tire wear.
B-Choice Standard axles with limited slip differentials front and rear 73%
tractive effort on soft ground.
TYRES
Tyres 23.5R25
HYDRAULICS
Valves Rexroth Closed-center, Load sensing hydraulic. Main valve with 3 sections
Steering The steering orbitrol hydraulically is actuated with priority valve
Automatic functions Bucket Return-to-dig, Boom Return-to-travel, Boom Auto-lift
Control type Pilot control with single joystick or two levers
Type of pump Tandem Variable displacement pump
(l/min) 240
(@rpm) 2000
AUXILIARY HYDRAULIC CIRCUIT
Max flow (l/min) 260
Max pressure (bar) 224
SERVICE CAPACITIES
Fuel tank (l) 288
AdBlue tank (permanently heated by engine coolant) (l) 41.3
Cooling system (l) 30
Engine oil (l) 13
Hydraulic oil tank (l) 91
Total hydraulic system oil (l) 180
Front and Rear Axles (l) 40 + 40
Transmission oil (l) 34
CAB PROTECTION
Protection against falling objects (FOPS) ISO EN3449
Protection against roll over (ROPS) ISO EN13510
SOUND AND VIBRATION
In the cab - LpA (dB) (ISO 6595/6396/3744) 70
Outside - LwA (dB) (SAE J88 SEP80) 103
Vibrations Operator ‘s seat meets the criteria of ISO 7096:2000.
The vibrations transmitted do not exceed 0.5 m/s²
BRAKES
Service brake Maintenance free, self-adjusting wet 4-wheel disc brakes
Brake disc area (m²/hub) 0.39
Parking brake With the negative brake all four wheels are automatically stopped when the engine is stopped
Disc brake area (cm²) 82
ELECTRICAL SYSTEM
24V. Batteries 2 x 12V.
Alternator (A) 65

ZNAJDŹ LOKALNEGO DEALERA

Droga do maszyn światowej klasy, z wiodącą obsługą posprzedażną oraz elastycznym finansowaniem rozpoczyna się tutaj.

Aby rozpocząć wyszukiwanie, wprowadź następujące informacje:

wpisz, żeby wyszukać to, czego potrzebujesz:

Znaleziono 0 wynik
zamknij
typ
przefiltrowano według:

Nie znaleziono wyników

Kliknij na ikonę pojawiającej się na całej stronie, aby ją dodać do ulubionych

Moje ulubione maszyny CASE

Znaleziono 0 wynik
zamknij