PT240D

The tire configuration — four in front and four in back — features a two-inch overlap and a total compaction width of 78 inches. The rubber-tired roller kneads hot mix asphalt gently at the surface as it rolls. The result is greater asphalt density and fewer voids in the finished product.

An iso-static front axle allows each of the front tires to oscillate three degrees in either direction, as well as up and down. This ensures contact with the ground at all times to minimize bridging and further improve compaction.

The central tire inflation system ensures consistent inflation to all eight tires and allows for easy, on-the-fly adjustment of tire pressure to meet ground conditions and compaction needs.

Two operating stations provide optimal visibility to the edge of the compaction zone no matter which side of the machine it’s on - all with centrally located controls. Options include an enclosed cab with heat.

The PT240D meets Tier 4 Final emissions regulations through a combination Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR) aftertreatment system – no lifetime service associated with a DPF.

All primary service points are centrally grouped for ease of access, and the PT240D is compatible with CASE SiteWatch™ telematics for added peace-of-mind and preventive maintenance monitoring.

OTHER

• Fixed ROPS Open Platform with hand rails
• Anti-vandal cover
• Halogen worklights x 4 (55 watt / front and rear)
• Turn signal indicator (left and right)
• Breaklights
• Tilt open hood
• Backup alarm
• Master disconnect switch
• Lift and tie down provision - 4-point
• Electric fuse protection
• Spin-on fuel, engine oil and hydraulic filters
• Brush scrapers on each tire

OPERATOR ENVIRONMENT

• Retractable seat belt - 3 in (76 mm)
• Dual operator stations
• Suspension seats with foldable arm rests
• Emergency stop button
• Lockable tool box

INSTRUMENT PANEL

• Steering wheel spinner knob
• Horn
• Hourmeter

INDICATOR LIGHTS

• Battery
• Engine oil pressure
• Intake preheater
• Engine temperature
• Parking brake
• Sprinkler system ON/OFF

MONITOR DISPLAY PANEL

• Engine RPM
• Engine hours
• Fuel rate
• System voltage
• % engine load at current RPM
• Coolant temperature
• Oil pressure
• Fuel economy
• Current fuel consumption

WATER SYSTEM

• Pressurized water system
• Water filtration - single stage
• Watering system drains

OTHER

• Cab w/ heat
• Cab air-conditioning
• Radio mounting w/ 2 speakers and antenna
• Cocoa mat scrapers
• Thermal aprons
• Scrap metal for ballast
• Tiltable scrapers (spring applied)
• Rotating beacon
• Air precleaner
• Spare tire with rim
• Radial tires
• Water tight chassis ballast compartment
• 460 liters - 122 gallons
• Edge cutter
• Spare Rim, no tire
• Differential lock (rear only)
• CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription

Base & Extended Warranty Coverage

1-Year/Unlimited-Hour Full-Coverage Base Limited Warranty
2-Year/2,000-Hour Extended Limited Engine Warranty

Purchased Protection

Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs. Plans are available up to six-years / 7,500 hours on CASE Compaction Equipment.

Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine Case service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.