Page added to favorites




  • Engine Power 214 hp | 160 kW
  • Blade Width 135" | 3422 mm

2050M Dozer

The largest in the CASE lineup, the 2050M dozer was designed with mass and muscle in mind. It offers up to 14% more power than the 1850K, nearly 81,000 lbs of drawbar pull and a robust, box-style C-frame engineered to withstand extreme blade forces. But this 24-ton heavyweight is also about less; less time spent on maintenance, less fuel usage thanks to industry-exclusive SCR technology and less worry thanks to the premium protection of ProCare. Simply put, from fine grading to heavy dozing, the 2050M gets more done.

2050M Specifications
2050M Specifications
File size 602.15 kb
M Series Brochure
M Series Brochure
File size 13.36 Mb
Full Line Brochure
Full Line Brochure
File size 2.35 Mb



The 2050M puts powerful precision at your disposal thanks to best-in-class horsepower of 214 hp, massive drawbar pull of nearly 81,000 lbs, fingertip controls and customizable steering, shuttle and blade sensitivity settings that can be adjusted between Smooth, Moderate and Aggressive to match ground conditions and operator comfort. A v-shaped cooling system with auto-reversing fan also helps maximize uptime by automatically clearing the cooling package of debris.

Fuel Efficiency

The M Series are the industry’s first dozers to be powered by an SCR (Selective Catalytic Reduction) Tier 4 engine. Rather than compromise power, this after-treatment system lets the engine do what it does best – run at peak performance. It also allows a lower hood profile for greater visibility than CEGR setups. SCR is simple too. No regeneration. No downtime. Just pour and go.

Comfort and Visibility

The redesigned cab offers floor-to-ceiling glass doors and a cab-forward design to provide maximum visibility with direct line-of-sight to the blade edge and cab-to-ground vision of only 15.5-feet. True positive pressure helps keep out the elements and advanced sealing results in one of the quietest cabs in the industry with a decibel rating of 76 dBa. Upgraded environmental controls and a factory-installed radio are also available. An electro-hydraulic joystick with push-button controls for blade shake and fine grading also help simplify operation.


The M Series is built to minimize maintenance time. Heavy-duty swing-out panels with pressure-closing latches are housed on a solid, box-style frame that’s designed to give quick access to key service points so daily maintenance can be done in a matter of minutes.

Protected by ProCare

The M Series comes standard with the industry’s first all-in-one heavy machine support program that’s as powerful as the equipment it protects – CASE ProCare.


Standard Equipment

Open Close


  • Fully enclosed ROPS cab
  • Single lever control for speed, steering and direction
  • Cloth air suspension seat w/ back adjustment
  • Retractable 2 in (51 mm) seat belt
  • Adjustable armrest
  • Two foot rest
  • Rearview mirror
  • Two door windshield wipers
  • Dome light
  • 12-volt accessory outlet
  • Headliner
  • Floor mat
  • Warning lights: Air filter; Alternator; Diagnostic fault indicator; Engine coolant temperature; Engine oil pressure; Hydraulic filter; Low fuel level; Park brake engaged; Service soon indicator; Transmission filter; Transmission charge pressure
  • Gauges: Battery voltage, Fuel level, Digital hour meter/tachometer/diagnostic/service reminder, Transmission oil temperature, Transmission speed indicator, Water temperature, Diesel Exhaust Fluid (DEF) level
  • Audible warnings: Engine coolant temperature; Engine oil pressure; Low fuel level; Transmission charge pressure; Temperature/hydraulic temperature


  • FTP F4HFE613J
  • Tier 4 Final Certified
  • V-Shape Cooling package with hydraulic-driven reversing fan
  • Integral engine oil cooling
  • Fuel filter
  • Dual element radial seal air cleaner
  • 120 amp alternator
  • (2) 950 CCA 12-volt batteries
  • Engine side panels


  • Dual path infinitely variable, single-lever controlled hydrostatic drive, with electronic straight tracking and counter-rotation
  • Final drive: Triple reduction; helical gear/planetary decelerator with hydrostatic drive retardation
  • Automatic spring-applied parking brake


  • 55° – 60° variable pitch, with integral adjustment tool
  • Single lever electro-hydraulic control for blade lift, angle and tilt


  • Hydraulic track adjusters
  • SALT HD track chain
  • Permanently lubricated track and carrier rollers
  • Track adjuster guard
  • Track guides – front and rear
  • Robust Smooth One Piece Track Frames with Easy Clean-out
  • Robust Rock Guards
  • Enhanced Track Recoil System
  • Central Grease point for Pivot Shaft and Equalizer Beam
  • Low Noise System Configuration
  • Low Vibration System Configuration


  • Anti-vandalism package
  • Backup alarm
  • Horn
  • Work lights: 2 front / 1 rear
  • Ground level master disconnect switch
  • Mirror
  • Pre-cleaner
  • Front pull hook


  • CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription

Optional Equipment

Open Close


  • Cab air quality system
  • Seat belt – 3 in (76 mm)
  • Rear wiper for cab
  • Radio
  • Bluetooth, WeatherBand, Satellite Radio


  • 4-spool hydraulic valve for field-installed ripper
  • 3-spool hydraulic valve without plugs for field-installed ripper
  • 3-spool hydraulic valve with plugs


  • Ripper – 2 position with 3 shanks
  • Rear tow hook
  • Drawbar
  • Drawbar with step


  • PAT – 142 in (3607 mm) High Visibility Blade 48 in height
  • PAT - 142 in (3607 mm) 54 in height
  • PAT 157.5 in (4064 mm) 54 in height
  • Folding PAT – 160 in (4064 mm)
  • HS Straight (WT/LGP) – 154 in (3900 mm)
  • Semi-U – 135 in (3422 mm)
  • Larger Bull Dozer LGP
  • Semi-U Blade - 157 in (3988 mm)
  • HS Straight (XLT) - 131 in (3334 mm)


  • CAB canopy brush guard
  • Full length rock guards
  • Waste Handler Guarding Package


  • Cab rear screen


  • Universal Blade Guidance Ready
  • Compatible with Leica, Trimble, and Topcon Systems from the Factory
  • Blade guidance ready – Trimble
  • Blade guidance ready – Leica
  • Blade guidance ready – Topcon
  • SiteControl CoPilot powered by Leica


  • Environmental drains
  • CASE Extended Life Track
  • Cold start – grid heater
  • Additional work lights
  • Rearview implement mirror
  • Turbine pre-cleaner


Open Close

Base & Extended Warranty Coverage

CASE ProCare applicable on select new heavy machine orders

See your CASE dealer for model availability and timing

CoPilot System

Scalable, entry-level machine control

With SiteControl CoPilot, get down to grade in fewer passes, regardless of underfoot conditions or operator experience. This system makes it easy to precisely set and hold a slope, but without the need for lasers, masts or GPS. It also reduces rework, increases fuel savings, and saves time from first cut to final grade.

Learn More


CASE dealers provide world-class equipment and aftermarket support, industry-leading warranties and flexible financing.

To start your search, please enter the following information:

What can we help you find?

0 results found
filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favorites

0 result found

Sign up to receive the latest on new products, customer solutions and exclusive offers.