ENGINE
Model
FPT F4HFE613F*A002
Cylinders
6
Displacement
6.7 l
Fuel injection
Direct
Fuel filter
Spin-on w/ in-line strainer
Air intake
Cross-flow
Cooling
Liquid
Engine speeds
RPM
High idle – no load
2200 +/- 50
Rated – full load
2200
Low idle
1100 +/- 25
Horsepower SAE J1349:
Engine rated net power
127 hp - 95 kW @2200 rpm
Engine max net power
138 hp - 103 kW @2200 rpm
Engine peak power
151 hp-113 kW @1800 rpm
Rated net torque
610 Nm
Max net torque
632 Nm
Engine lubrication
Pump
Deep sump plate cooler w/ pressurized under-piston nozzles
Pump operating angle ratings:
Side-to-side
35°
Fore and aft
45°
Radiator:
Core size area (Water Radiator)
0.32 m²
Rows of tubes
25
Fan
Diameter
660 mm
Ratio
0,96:1
POWERTRAIN
Dual path hydrostatic
Pump
Variable axial piston
Motor
Variable bent axis piston
Max. drawbar pull*
213.5 kN
Transmission
Single lever control electronic straight tracking
Oil filter
2 micron, spin-on, replaceable
Travel speeds* Forward
0 – 9.3 km/h
Travel speeds* Reverse
0 – 9.3 km/h
Parking brakes
Heavy-duty, spring-applied, hydraulic pressure release
Steering brakes
Hydrostatic
Final drive
2 helical gear reduction to planetary output
Ratio
61.4:1
TRANSMISSION COOLING
Type
Oil to air
Core size
0.18 m²
UNDERCARRIAGE
Track adjustment
Hydraulic
Frame
Oscillating equalizer beam suspension and pivot shaft
Track link pitch
175 mm
Track shoe height
55 mm
Pin diameter
36.58 mm
Bushing diameter
"Heavy-Duty" track
62 mm
"Max-Life" track
79 mm
Track shoes per side
43
Track rollers per side
7
Carrier rollers per side
2
Track roller rail diameter
203 mm
Track on ground
Shoe area 559 mm
29050 cm²
Shoe area 660 mm
34323 cm²
Shoe area 762 mm
39627 cm²
* with 560 mm shoes
ELECTRICAL SYSTEM
Alternator
120 amps
Batteries (2)
12-volt, low-maintenance 925 cold-cranking amps @ -18°C
OPERATOR ENVIRONMENT
Operator environment
ROPS/FOPS cab; Pneumatically suspended seat; Seat belt; Adjustable armrests; Foot rests; Tool storage area; Headliner; Floor mat; Mirror; Noise level 79dbA.
Warning lights
Air filter; Alternator; Diagnostic fault indicator; Engine coolant temperature; Engine oil pressure; Hydraulic filter; Low fuel level; Park brake engaged; Service soon indicator; Transmission filter; Transmission charge pressure.
Gauges
Ad Blue Level; Battery voltage; Digital hourmeter/tachometer diagnostic/service reminder; Fuel level; Transmission oil temperature; Transmission speed indicator; Water temperature.
Audible warnings
Engine coolant temperature; Engine oil pressure; Low fuel level, Transmission charge pressure; Transmission/hydraulic temperature; Rear wiper for cab; Internal mirror; Radio.
HYDRAULICS
Pump flow @ 2200 RPM
138.5 l/min
Max pressure
195 bar
Lift cylinder™
nr. 2
Bore diameter
108 mm
Rod diameter
50.8 mm
Stroke
488 mm
Angle cylinder
nr. 2
Bore diameter
114.3 mm
Rod diameter
63.5 mm
Stroke
465.7 mm
Tilt cylinder
nr. 1
Bore diameter
127 mm
Rod diameter
63.5 mm
Stroke
148.3 mm
SERVICE CAPACITY
Fuel tank
322 l
Ad Blue tank
52 l
Engine oil w/ filter
16.4 l
Engine oil w/o filter
15.6 l
Engine cooling system
28 l
Hydraulic reservoir
193 l
Final drive (per side)
15 l
Track rollers (ea)
0.25 l
Front idlers (ea)
0.33 l
Carrier rollers – each
0.25 l
PAT BLADE
Variable blade pitch
55° +/- 5°
Lift speed – per second
503 mm
Cutting edge
Reversible, replaceable
Width
203.2 mm
Thickness
19.1 mm
RIPPER
Max. penetration
499 mm
Width
1711 mm
Cut
1635 mm
Max. ground clearance
403 mm
Max. number of shanks
3
Tooth spacing w/3 teeth
785 mm
Hydraulic cylinder
Double-acting
Diameter
102 mm
Stroke
254 mm
Rod
50.8 mm