CX300E
Looking for big diggers that promise efficient productivity, enhanced versatility, cleaner power, comfortable and safer operations, and easy maintenance? Look no further than the CX300E crawler excavator. The CASE CX300E big excavator is part of the CASE E-Series. This large excavator uses an FPT NEF6 engine that can power up to 193.4 kW at 1900 min-1 and has an operating weight of up to 29.7t.
Download Brochures
Share or download a brochure for additional information.
29.6 t
193.4 at 1900 min-1
Solutions
CASE SiteWatch™
Boost your machine's profitability by tracking and managing your fleet's operation.
CASE SiteConnect
Reduce your Total Cost of Ownership by increased connectivity resulting to more efficient service.
CASE SiteControl™
MACHINE CONTROL SOLUTIONS
The Leica iCONstruct portfolio offers you a straightforward solution that you can customize to match the specific requirements of your road and building construction business.
Explore the Features
The pressurised cab has improved sealing, with wide access space and increased foot space. The console is suspended with the seat and has optimised control lever positions thanks to which the operator can maintain their preferred working posture when they adjust the seat’s position. The E-series crawler excavators feature the largest monitor in the industry (25cm) with high resolution and has five buttons that can be configured to directly enter the most frequently used menus or screens, increasing efficiency and productivity further.
Learn about all the features and advantages the CASE CX250E crawler excavator can give you.Big Excavator CX300E Advantages
Like all new-gen CASE Equipment, the CX300E big excavator is configurable with the CASE SiteConnect module for interactive maintenance, and for operators to seek remote assistance.The CX300E big digger can be used in urban, infrastructure, recycling and quarrying job sites for its reliability, unbeatable speed vs control ratio, outstanding comfort and low fuel consumption. The upper carrier rollers on the CX300E have been upgraded for greater durability. The CX300E large excavator helps increase overall productivity through comfortable working conditions for the operators. The pressurised cab has improved sealing, with wide access space and increased foot space.
The console is suspended with the seat and has optimised control lever positions thanks to which the operator can maintain their preferred working posture when they adjust the seat’s position. The E-series crawler excavators feature the largest monitor in the industry (25cm) with high resolution and has five buttons that can be configured to directly enter the most frequently used menus or screens, increasing efficiency and productivity further.
Learn about all the features and advantages the CASE CX300E big excavator can give you.
Standard Equipment
- Eco mode
- Auto idle
- One-touch idle
- Idle shutdown
- Pump Torque Control (PTC)
- Boom Economy Control (BEC)
- Swing Relief Control (SRF)
- Spool Stroke Control (SSC)
- Boom Oil Regeneration (BOR)
- Hydraulic flow control balance
- Electronically controlled hydraulic pumps
- Auto power boost
- Auto travel speed change
- 4 selectable work modes
- Overload warning device
- ISO pattern controls
- Pre-set auxiliary pump settings
- Switch controlled auxiliary selection
- Auxiliary valve
- Hydraulic filter restriction indicator
- Oil cooler
- 5,000 hour hydraulic oil change interval
- 2,000 hour hydraulic filter change interval
- Hydraulic quick coupler provision
- Hydraulic fluid supply port with air breather
- ISO mirrors
- Handrail – RH access
- ISO guard rails
- Isolation mounted cab (fluid and spring)
- Lifting eyes for counterweight
- Lockable fuel cap, service doors and toolbox
- Rear and side view safety camera
- ROPS protection
- FOPS guard OPG level 2
- Pressurized cab
- Tempered safety glass
- One-touch lock front window
- Sun visor & rain deflector
- A/C, heating and defrosting with automatic control
- Luch box & cool box, cup holders & ashtray
- Interior dome light
- Multi-adjustable low frequency air suspension console and tiltable seat with air springs and double acting hydraulic damper
- Sliding seat – 90 mm
- Seat belt with fasten detection
- Adjustable armrests
- Low-effort joystick controls
- Sliding cockpit - 80 mm
- Auxiliary select system
- Aux-in port for personal electronics
- Multifunction LED color monitor (10”), with silicon switches
- 22 selectable languages for monitor
- Anti-theft system (start code system)
- Split type floor mat
- 12-volt electric socket
- 24-volt cigarette lighter
- One-piece right hand window
- 4 halogen work lights (2 cab roof, 1 LH boom, 1 toolbox)
- Windshield wiper / washer
- Clear (Lexan) roof window with sunshade
- Storage compartments
- On-board diagnostic system
- Standard boom 5.85 m [CX250E] or 6.15 m [CX300E]
- Long reach boom 10.3 m [CX250E Long Reach]
- Arm 3.00 m [CX250E] or 3.18 m [CX300E]
- Long reach arm 8.0 m [CX250E Long Reach]
- Attachment types and names storable in the display
- 600 mm steel triple grouser shoes
- Full overlap turntable bearing tub
- Sealed link chain
- Lashing points
- SiteConnect module and 3 years advanced SiteWatch subscription with remote monitoring
Optional Equipment
- Engine oil and hydraulic oil sample port
- Engine precleaner cyclonic self-cleaning type
- Reversible fan [CX250E]
- Clamshell circuit
- Low-flow circuit, proportional control [n.a. on CX250E Long Reach]
- Single acting hammer circuit with electrical proportional control
- Multifunction (hammer/high flow) circuit with electrical proportional control [n.a. on CX250E Long Reach]
- Double acting circuit with electrical proportional control [only on CX250E Long Reach]
- 700 / 800 mm steel triple grouser shoes
- 900 mm steel triple grouser shoes [for swampy grounds, only on CX250E LC]
- Triple track guide
- Heated seat
- Front cab guard - vertical bars (OPG level 2)
- Front cab guard - vertical bars (OPG level 1), available as DIA kit
- Front mesh screen, available as DIA kit
- Travel alarm
- AM/FM Bluetooth radio with antenna and 2 speakers
- 8 LED work lights (2 cab roof, 1 LH boom, 1 toolbox, 4 all-around)
- Rain deflector
- CASE Maximum View Monitor - 270° view with additional left side camera
- Arm HD 2.50 / 3.52 m [CX250E] or 2.65 / 3.66 m [CX300E]
Compatible Attachments
Buckets for Direct Fit and G type quick coupler
Wide range of buckets for Direct fit and/orfor G type quick couplers.
Buckets for Direct Fit or MultiFit quick coupler
Wide range of buckets for Direct fit and/or for MultiFit "S" quick couplers.
G type hydraulic quick coupler
Hydraulic quick coupler MultiFit "S"
Fully hydraulic reversible quick coupler.
Compare Specifications
ENGINE | ||||||
Model | ||||||
Type | ||||||
Emissions level | ||||||
Number of cylinders / Displacement (l) | ||||||
Bore and stroke (mm) | ||||||
Rated flywheel horse power ISO 9249 (kW) | ||||||
Rated flywheel horse power ISO 14396 (kW) | ||||||
Maximum torque ISO 9249 (Nm) | ||||||
Maximum torque ISO 14396 (Nm) | ||||||
HYDRAULIC SYSTEM | ||||||
SWING | ||||||
FILTERS | ||||||
ELECTRICAL SYSTEM | ||||||
UNDERCARRIAGE | ||||||
NOISE | ||||||
CIRCUIT AND COMPONENT CAPACITIES |