CX490D
CX490D Stage V excavators deliver exceptional performances with controllability and speed suited to reliably perform even under severe stress and in harsh environments, while keeping the operator always safe and comfortable, both inside and outside of the cab. Its durable structure and components make it a great companion for a variety of tasks, whether it is for working in residential building construction or quarrying applications, the CX490D is a trusted and reliable machine to keep you always up and running.
DOWNLOADS
Download Brochures
Share or download a brochure for additional information.
Weight
50.8 t
Power
270 kW / 362 hp
Solutions
CASE SiteWatch™
Boost your machine's profitability by tracking and managing your fleet's operation.
CASE SiteConnect
Reduce your Total Cost of Ownership by increased connectivity resulting to more efficient service.
CASE SiteControl™
MACHINE CONTROL SOLUTIONS
The Leica iCONstruct portfolio offers you a straightforward solution that you can customize to match the specific requirements of your road and building construction business.
SPECIFICATIONS
Standard Equipment
- Isuzu 6-cylinder turbo-charged diesel
- EU stage V Certified
- Selective Catalytic Reduction (SCR)
- Diesel Oxidation Catalyst (DOC)
- Cooled Exhaust Gas Recirculation (CEGR)
- Diesel Particulate Diffuser (DPD)
- VGT turbocharger
- Electronic fuel injection
- High pressure common rail system
- Neutral safety start
- Auto-engine warm up, emergency stop
- Glow-plug pre-heat
- Engine Protection Feature (EPF)
- Dual-stage fuel filtration
- Dual element air filter
- Remote oil filter
- Green plug oil drain
- 500-hour engine oil change interval
- 24-Volt system
- Battery disconnect switch
- High ambient temperature cooling package
- External Fuel and AdBlue gauges
- Fuel cooler
- Fuel filter restriction indicator
- Fuel prefilter Water sensor with dedicated message on Cabin monitor
- Fuel shut-off valve
- Idle start
- Radiator, oil cooler, intercooler – protective Screen
- Hydraulic reversing cooling fan
- Refueling Pump
- Engine Idle/Fuel Economy System:
- Auto-idle
- One-touch idle
- Auto-idle shut-down - Torque control
- Boom Economy Control (BEC)
- Swing Relief Control (SWC)
- Spool Stroke Control (SSC)
- Electronically controlled hydraulic pumps
- Auto power boost
- Auto travel speed change
- Selectable work modes
- Overload warning device
- ISO pattern controls
- Pre-set auxiliary pump settings
- Manual lever for auxiliary selection outside cab
- Auxiliary valve
- Hydraulic filter restriction indicator
- Oil cooler
- 5,000 hour hydraulic oil change interval
- 2,000 hour hydraulic fi lter change interval
- ISO mirrors
- Handrail - RH access
- Isolation mounted cab (fluid and spring)
- Lifting eyes for counterweight
- Lockable fuel cap, service doors and toolbox
- Rear and side view safety camera
- ROPS protection
- FOPS guard OPG level II
- Pressurized cab
- Tempered safety glass
- One-touch lock front window
- Sun visor&rain deflector
- AC/heat/defrost w/auto climate control
- Hot&coolbox, cup holder & ashtray
- Interior dome light
- Cloth covered air-suspension high-back seat
- Sliding seat – 90 mm
- Seat-belt
- Adjustable armrests
- Tilting consoles - 4-position
- Low-effort joystick controls
- Sliding cockpit 180 mm
- Aux-in port for personal electronics
- Multifunction LED color monitor (180 mm)
- 26 selectable languages for monitor
- Anti-theft system (start code system)
- Rubber floormat
- 12-volt electric socket
- 24-volt cigarette lighter
- One-piece right hand window
- Working lights (boom& upperstructure)
- Cab top working lights
- Windshield wiper / washer
- Storage compartments
- On-board diagnostic system
- Travel alarm
- DAB+ radio with antenna and 2-speakers
- 9 LED work lights (2 cab roof, 1 LH boom, 1 RH boom, 1 toolbox, 4 all-around)
- Standard boom 7 m (CX490D)
- Mass Excavation boom 6.5 m (CX500D ME)
- HD arm 3.40 m (CX490D)
- HD Mass Excavation arm 2.50 m (CX500D ME)
- Auxiliary pipe brackets
- Centralized lube bank
- Attachment cushion valve
- Hydraulic quick coupler provision
- Safety valves and bucket linkage with hook
- 600 mm steel triple grouser shoes
- Full overlap turntable bearing tub
- Sealed link chain
- Lashing points
- Double track guide
SPECIFICATIONS
Optional Equipment
- Low-flow circuit, proportional control
- HD arm 2.50 m
- Front cab guard - vertical bars (OPG level 2)
- Front cab guard - vertical bars (OPG level 1
- CASE Maximum View Monitor (CMVM) - 3 cameras system)
- Catwalks
- Hydraulic and engine oil sampling ports
- 750 / 900 mm steel triple grouser shoes
- 600 mm steel double grouser shoes
- Full track guide
- 3 years advanced SiteWatch subscription with remote monitoring
Compatible Attachments
Your CASE equipment is the platform - your attachments make the difference in how much work you win and how profitable your machine is.
Buckets for Direct Fit and G type quick coupler
Wide range of buckets for Direct fit and/orfor G type quick couplers.
Buckets for Direct Fit or MultiFit quick coupler
Wide range of buckets for Direct fit and/or for MultiFit "S" quick couplers.
G type hydraulic quick coupler
Universal hydraulic quick coupler to allow easy change of pin-on buckets and attachments with absolute safety.
Primary crusher
Ideal for the most delicate primary demolition phases, reinforced concrete structures and removal of materials at significant heights.
SPECIFICATIONS
Compare Specifications
ENGINE | ||||
Model | ||||
Type | ||||
Emissions level | ||||
Number of cylinders/ Displacement (l) | ||||
Bore and stroke (mm) | ||||
Rated flywheel horse power - SAE J 1349, ISO 9249 (kW / hp) | ||||
Rated flywheel horse power - ISO 14396 (kW / hp) | ||||
Rated flywheel horse power - With fan pump (kW / hp) | ||||
Maximum torque - SAE J 1349, ISO 9249 (Nm) | ||||
Maximum torque - ISO 14396 (Nm) | ||||
HYDRAULIC SYSTEM | ||||
SWING | ||||
FILTERS | ||||
ELECTRICAL SYSTEM | ||||
UNDERCARRIAGE | ||||
CIRCUIT AND COMPONENT CAPACITIES | ||||
SOUND LEVEL | ||||