Page added to favorites


Pneumatic Tire Roller


CASE PT240D Pneumatic Tire Roller

The Tier 4 Final PT240D is built for sub-base and asphalt compaction on large-scale road and highway projects, airport runways and other large commercial developments. With an operating weight of 21,380 pounds and the ability to ballast up to 52,910 pounds, this pneumatic tire roller is designed to achieve compaction in fewer passes and provide improved penetration and compaction in asphalt paving applications.

PT240D Specifications
PT240D Specifications
File size 469.3 kb
Asphalt Compactors
Asphalt Compactors
File size 3.75 Mb
Full Line Brochure
Full Line Brochure
File size 4.55 Mb

PT240D Pneumatic Tire Roller Features

Many Rollers in One

Open Close
Many Rollers in One

The ability to ballast the PT240D using steel, sand and water allows the roller to compact a broader variety of lifts and materials, and complete work that may otherwise require numerous, different-sized rollers.

Improved Compaction Quality

Open Close
Improved Compaction Quality

The tire configuration — four in front and four in back — features a two-inch overlap and a total compaction width of 78 inches. The rubber-tired roller kneads hot mix asphalt gently at the surface as it rolls. The result is greater asphalt density and fewer voids in the finished product.

It’s All About the Oscillation

Open Close
It’s All About the Oscillation

An iso-static front axle allows each of the front tires to oscillate three degrees in either direction, as well as up and down. This ensures contact with the ground at all times to minimize bridging and further improve compaction.

Greater Customization with Central Tire Inflation System

Open Close
Greater Customization with Central Tire Inflation System

The central tire inflation system ensures consistent inflation to all eight tires and allows for easy, on-the-fly adjustment of tire pressure to meet ground conditions and compaction needs.

Flexible, Comfortable Operator Station

Open Close
Flexible, Comfortable Operator Station

Two operating stations provide optimal visibility to the edge of the compaction zone no matter which side of the machine it’s on - all with centrally located controls. Options include an enclosed cab with heat.

Tier 4 Final with no Diesel Particulate Filter (DPF)

Open Close
Tier 4 Final with no Diesel Particulate Filter (DPF)

The PT240D meets Tier 4 Final emissions regulations through a combination Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR) aftertreatment system – no lifetime service associated with a DPF.

Easy to Service and Maintain

Open Close
Easy to Service and Maintain

All primary service points are centrally grouped for ease of access, and the PT240D is compatible with CASE SiteWatch™ telematics for added peace-of-mind and preventive maintenance monitoring.


Standard Equipment

Open Close


  • Fixed ROPS Open Platform with hand rails
  • Anti-vandal cover
  • Halogen worklights x 4 (55 watt / front and rear)
  • Turn signal indicator (left and right)
  • Breaklights
  • Tilt open hood
  • Backup alarm
  • Master disconnect switch
  • Lift and tie down provision - 4-point
  • Electric fuse protection
  • Spin-on fuel, engine oil and hydraulic filters
  • Brush scrapers on each tire


  • Retractable seat belt - 3 in (76 mm)
  • Dual operator stations
  • Suspension seats with foldable arm rests
  • Emergency stop button
  • Lockable tool box


  • Steering wheel spinner knob
  • Horn
  • Hourmeter


  • Battery
  • Engine oil pressure
  • Intake preheater
  • Engine temperature
  • Parking brake
  • Sprinkler system ON/OFF


  • Engine RPM
  • Engine hours
  • Fuel rate
  • System voltage
  • % engine load at current RPM
  • Coolant temperature
  • Oil pressure
  • Fuel economy
  • Current fuel consumption


  • Pressurized water system
  • Water filtration - single stage
  • Watering system drains


  • CASE Sitewatch Telematics - includes hardware and 5-yr advanced data subscription

Optional Equipment

Open Close


  • Cab w/ heat
  • Cab air-conditioning
  • Radio mounting w/ 2 speakers and antenna
  • Cocoa mat scrapers
  • Thermal aprons
  • Scrap metal for ballast
  • Tiltable scrapers (spring applied)
  • Rotating beacon
  • Air precleaner
  • Spare tire with rim
  • Radial tires
  • Water tight chassis ballast compartment
  • 460 liters - 122 gallons
  • Edge cutter
  • Spare Rim, no tire
  • Differential lock (rear only)


Open Close

Base & Extended Warranty Coverage

1-Year/Unlimited-Hour Full-Coverage Base Limited Warranty
2-Year/2,000-Hour Extended Limited Engine Warranty

Purchased Protection

Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs. Plans are available up to six-years / 7,500 hours on CASE Compaction Equipment.

Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The Case Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine Case service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.

PT240D Pneumatic Tire Roller Walkaround

The PT240D pneumatic tire roller from CASE meets Tier 4 Final emissions standards while providing excellent quality in fewer passes for sub-base and asphalt compaction applications.


CASE dealers provide world-class equipment and aftermarket support, industry-leading warranties and flexible financing.

To start your search, please enter the following information:

What can we help you find?

0 results found
filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favorites

0 result found